(2019) 2020 A.J. Durelli Award. This award recognizes younger members of the Society for Experimental Mechanics (SEM) for contributions made early in their career. As stated in the award letter, the award was given for the “outstanding NDE and structural health monitoring innovations and contributions to the field of experimental mechanics”..
(2019) • 2019 Fellowship Research Award of the ASNT (granted as a Faculty Advisor). Miss Hoda Jalali is the graduate student receiving the Fellowship.
(2019) • 2019 Distinguished Structural Engineering Alumni Lecture Award. This is a new award that the faculty at the University of California at San Diego created in 2018 to recognize an outstanding alumnus of the Department who has made outstanding contributions to one or more of the disciplines within the Department of Structural Engineering. I was the first recipient. Awardee delivers a 30-minute lecture during our 2019 SE Research Showcase (https://seshowcase.ucsd.edu/)..
(2017) 2017 ASNT Outstanding Paper Award received for the paper: Evola, P., Rizzo, P., and *Vandone, A. (2016). “Fractal Analysis Applied to Laser-spot Thermography,” Materials Evaluation, 74(3), 409-417..
(2016) 2016 CHANCELLOR'S DISTINGUISHED RESEARCH AWARD, Junior Scholar Award. The award includes faculty members who, by virtue of the exceptional quality of their early contributions, have demonstrated great potential as scholars and have achieved some international standing. Candidates for this award must have received their highest degree no more than 12 years before the time of nomination..
(2015) 2015 Fellowship Research Award of the ASNT (granted as a Faculty Advisor).
(2015) 2015 SHM POY. A structural health monitoring person of the year (SHM-POY) is selected by the editors and associate editors of Structural Health Monitoring: An International Journal. The POY made an outstanding contribution to the field of SHM that will benefit society. This contribution can be in the form of theory, analysis, applications, education, or other ways that support the discipline of SHM and benefit society. The award is meant to recognize accomplishments within the past year or few years..
(2013) 2013 ASNT Outstanding Paper Award received for the paper: Ni, X., and Rizzo, P. (2012). "Use of highly nonlinear solitary waves in NDT," Materials Evaluation, 70(5), 561-569..
(2013) Project "Messengers of Knowledge" awarded by the Italian Department of Education, University and Scientific Research (Ministero dell' Istruzione dell' Universita' e della Ricerca: MIUR) for the project titled Mechanics of Materials for Civil, Environmental, Mechanical and Aerospace Engineers. The peer-reviewed award is to teach one course at the University of Palermo, Italy in Fall 2013.
(2012) Achenbach Medal.
(2011) Who's Who in America.
(2009) Fellowship Research Award of the ASNT (granted as a Faculty Advisor).
(2008) Lister Vickery Trophy, 1st prize winner of the "INSEAD Comitel 16th Business Venture Competition, INSEAD Business Plan Competition 2008" (Solitonik Team).
(2007) 25th Silver Anniversary Edition of Who's Who in the World.
(2007) Faculty Grant Award from the American Society for Nondestructive Testing.
(2006) 9th edition of Who's Who in Science and Engineering.
(2002) Fellowship Research Award of the ASNT (granted as a graduate student).
(1998) Italian Professional Engineering license.
2020 Fellowship Research Award of the ASNT (granted as a Faculty Advisor). Mr. Yuhui Zeng is the graduate student receiving the Fellowship..
PhD, Structural Engineering, University of California, 2004
MS, Structural Engineering, University of California, 2002
Undergraduate in Aeronautical Engineering, University of Palermo, 1998
Hodgson, M., Komaie, A., Rizzo, P., & Dickerson, S.J. (2025). Finite element model and experimental validation of a solitary wave-based tonometer. J Mech Behav Biomed Mater, 168, 107000.Elsevier. doi: 10.1016/j.jmbbm.2025.107000.
Enshaeian, A., Ghahremani, B., & Rizzo, P. (2024). Case Studies about Finite Element Modeling and Wireless Sensing of Three Pennsylvania Bridges. Sensors (Basel), 24(6), 1714.MDPI. doi: 10.3390/s24061714.
Enshaeian, A., Ghahremani, B., & Rizzo, P. (2024). Structural health monitoring of a lenticular truss bridge: a comprehensive study. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 23(6), 3615-3639.SAGE Publications. doi: 10.1177/14759217231225925.
Belding, M., Enshaeian, A., & Rizzo, P. (2023). A Machine learning-based approach to determining stress in rails. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 22(1), 639-656.SAGE Publications. doi: 10.1177/14759217221085658.
Hodgson, M., Rizzo, P., & Dickerson, S.J. (2023). Wireless portable transducer for nondestructive evaluation applications based on highly nonlinear solitary waves. MEASUREMENT, 214, 112760.Elsevier. doi: 10.1016/j.measurement.2023.112760.
Jalali, H., Misra, R., Dickerson, S.J., & Rizzo, P. (2023). Remote wireless monitoring of localized corrosion using compact solitary waves. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 22(3), 1876-1892.SAGE Publications. doi: 10.1177/14759217221113331.
Belding, M., Enshaeian, A., & Rizzo, P. (2022). Vibration-Based Approach to Measure Rail Stress: Modeling and First Field Test. Sensors (Basel), 22(19), 7447.MDPI. doi: 10.3390/s22197447.
Ghahremani, B., Enshaeian, A., & Rizzo, P. (2022). Bridge Health Monitoring Using Strain Data and High-Fidelity Finite Element Analysis. Sensors (Basel), 22(14), 5172.MDPI. doi: 10.3390/s22145172.
Misra, R., Jalali, H., Rizzo, P., & Dickerson, S.J. (2022). Wireless Node for Highly Nonlinear Solitary Wave Transducers. IEEE SENSORS JOURNAL, 22(4), 3540-3552.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/JSEN.2021.3136859.
Enshaeian, A., & Rizzo, P. (2021). Stability of continuous welded rails: A state-of-the-art review of structural modeling and nondestructive evaluation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 235(10), 1291-1311.SAGE Publications. doi: 10.1177/0954409720986661.
Enshaeian, A., Luan, L., Belding, M., Sun, H., & Rizzo, P. (2021). A Contactless Approach to Monitor Rail Vibrations. EXPERIMENTAL MECHANICS, 61(4), 705-718.Springer Nature. doi: 10.1007/s11340-021-00691-z.
Rizzo, P., & Enshaeian, A. (2021). Challenges in Bridge Health Monitoring: A Review. Sensors (Basel), 21(13), 4336.MDPI. doi: 10.3390/s21134336.
Jalali, H., & Rizzo, P. (2020). Highly nonlinear solitary waves for the detection of localized corrosion. SMART MATERIALS AND STRUCTURES, 29(8), 085051.IOP Publishing. doi: 10.1088/1361-665X/ab9b5b.
Misra, R., Jalali Najafabadi, H., Dickerson, S., & Rizzo, P. (2020). Wireless Module for Nondestructive Testing/Structural Health Monitoring Applications Based on Solitary Waves. Sensors (Basel), 20(11), 3016.MDPI. doi: 10.3390/s20113016.
Nasrollahi, A., & Rizzo, P. (2020). Modeling a new dynamic approach to measure intraocular pressure with solitary waves. J Mech Behav Biomed Mater, 103, 103534.Elsevier. doi: 10.1016/j.jmbbm.2019.103534.
Rizzo, P. (2020). A review on the latest advancements in the non-invasive evaluation/monitoring of dental and trans-femoral implants. Biomed Eng Lett, 10(1), 83-102.Springer Nature. doi: 10.1007/s13534-019-00126-8.
Zheng, B., Rizzo, P., & Nasrollahi, A. (2020). Outlier analysis of nonlinear solitary waves for health monitoring applications. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 19(4), 1160-1174.SAGE Publications. doi: 10.1177/1475921719876089.
Nasrollahi, A., Lucht, R., & Rizzo, P. (2019). Solitary Waves to Assess the Internal Pressure and the Rubber Degradation of Tennis Balls. EXPERIMENTAL MECHANICS, 59(1), 65-77.Springer Nature. doi: 10.1007/s11340-018-0432-1.
La Malfa Ribolla, E., Hajidehi, M.R., Rizzo, P., Scimemi, G.F., Spada, A., & Giambanco, G. (2018). Ultrasonic inspection for the detection of debonding in CFRP-reinforced concrete. STRUCTURE AND INFRASTRUCTURE ENGINEERING, 14(6), 807-816.Taylor & Francis. doi: 10.1080/15732479.2017.1384843.
Nasrollahi, A., & Rizzo, P. (2018). Axial stress determination using highly nonlinear solitary waves. J Acoust Soc Am, 144(4), 2201.Acoustical Society of America (ASA). doi: 10.1121/1.5056172.
Nasrollahi, A., Deng, W., Ma, Z., & Rizzo, P. (2018). Multimodal structural health monitoring based on active and passive sensing. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 17(2), 395-409.SAGE Publications. doi: 10.1177/1475921717699375.
Nasrollahi, A., Rizzo, P., & Orak, M.S. (2018). Numerical and Experimental Study on the Dynamic Interaction Between Highly Nonlinear Solitary Waves and Pressurized Balls. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 85(3).ASME International. doi: 10.1115/1.4038990.
Sefa Orak, M., Nasrollahi, A., Ozturk, T., Mas, D., Ferrer, B., & Rizzo, P. (2018). Non-Contact Smartphone-Based Monitoring of Thermally Stressed Structures. Sensors (Basel), 18(4), 1250.MDPI. doi: 10.3390/s18041250.
Bagheri, A., & Rizzo, P. (2017). Assessing the pressure of tennis balls using nonlinear solitary waves: a numerical study. Sports Engineering, 20(1), 53-62.Springer Nature. doi: 10.1007/s12283-016-0217-7.
Bagheri, A., Hosseinzadeh, A.Z., Rizzo, P., & Amiri, G.G. (2017). Time domain damage localization and quantification in seismically excited structures using a limited number of sensors. JOURNAL OF VIBRATION AND CONTROL, 23(18), 2942-2961.SAGE Publications. doi: 10.1177/1077546315625141.
Bagheri, A., Rizzo, P., & Li, K. (2017). Ultrasonic imaging algorithm for the health monitoring of pipes. JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING, 7(1), 99-121.Springer Nature. doi: 10.1007/s13349-017-0214-y.
Deng, W., Nasrollahi, A., Rizzo, P., & Li, T. (2017). Merging Three NDT Techniques into a Single Structural Health Monitoring System. MATERIALS EVALUATION, 75(10), 1299-1307.
Li, K., & Rizzo, P. (2017). Experimental parametric analysis of an energy harvester based on highly nonlinear solitary waves. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 28(6), 772-781.SAGE Publications. doi: 10.1177/1045389X16657422.
Li, K., & Rizzo, P. (2017). Impurity detection in a chain of spherical particles using time reversal and highly nonlinear solitary waves. JOURNAL OF APPLIED PHYSICS, 121(14), 145105.AIP Publishing. doi: 10.1063/1.4980104.
Nasrollahi, A., Deng, W., Rizzo, P., Vuotto, A., & Vandenbossche, J.M. (2017). Nondestructive testing of concrete using highly nonlinear solitary waves. NONDESTRUCTIVE TESTING AND EVALUATION, 32(4), 381-399.Taylor & Francis. doi: 10.1080/10589759.2016.1254212.
Rizzo, P., & Li, K. (2017). Analysis of the geometric parameters of a solitary waves-based harvester to enhance its power output. SMART MATERIALS AND STRUCTURES, 26(7), 075004.IOP Publishing. doi: 10.1088/1361-665X/aa7401.
Bagheri, A., & Rizzo, P. (2016). Guided ultrasonic wave testing of an immersed plate with hidden defects. OPTICAL ENGINEERING, 55(1), 011003.SPIE, the international society for optics and photonics. doi: 10.1117/1.OE.55.1.011003.
Bagheri, A., Ribolla, E.L.M., Rizzo, P., & Al-Nazer, L. (2016). On the coupling dynamics between thermally stressed beams and granular chains. ARCHIVE OF APPLIED MECHANICS, 86(3), 541-556.Springer Nature. doi: 10.1007/s00419-015-1039-y.
Bagheri, A., Rizzo, P., & Al-Nazer, L. (2016). A numerical study on the optimization of a granular medium to infer the axial stress in slender structures. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 23(10), 1131-1143.Taylor & Francis. doi: 10.1080/15376494.2015.1039679.
Evola, P., Vandone, A., & Rizzo, P. (2016). Fractal Analysis Applied to Laser Spot Thermography. MATERIALS EVALUATION, 74(3), 409-417.
Li, K., & Rizzo, P. (2016). Nonreciprocal propagation of solitary waves in granular chains with asymmetric potential barriers. JOURNAL OF SOUND AND VIBRATION, 365, 15-21.Elsevier. doi: 10.1016/j.jsv.2015.11.032.
Rizzo, P., Nasrollahi, A., Deng, W., & Vandenbossche, J.M. (2016). Detecting the Presence of High Water-to-Cement Ratio in Concrete Surfaces Using Highly Nonlinear Solitary Waves. APPLIED SCIENCES-BASEL, 6(4), 104.MDPI. doi: 10.3390/app6040104.
Bagheri, A., Pistone, E., & Rizzo, P. (2015). Outlier Analysis and Artificial Neural Network for the Noncontact Nondestructive Evaluation of Immersed Plates. RESEARCH IN NONDESTRUCTIVE EVALUATION, 26(3), 154-173.Taylor & Francis. doi: 10.1080/09349847.2015.1022677.
Bagheri, A., Ribolla, E.L.M., Rizzo, P., Al-Nazer, L., & Giambanco, G. (2015). On the Use of L-shaped Granular Chains for the Assessment of Thermal Stress in Slender Structures. EXPERIMENTAL MECHANICS, 55(3), 543-558.Springer Nature. doi: 10.1007/s11340-014-9964-1.
Bagheri, A., Rizzo, P., & Al-Nazer, L. (2015). Determination of the Neutral Temperature of Slender Beams by Using Nonlinear Solitary Waves. JOURNAL OF ENGINEERING MECHANICS, 141(6), 04014163.American Society of Civil Engineers (ASCE). doi: 10.1061/(ASCE)EM.1943-7889.0000886.
Deng, W., Nasrollahi, A., Rizzo, P., & Li, K. (2015). On the Reliability of a Solitary Wave Based Transducer to Determine the Characteristics of Some Materials. Sensors (Basel), 16(1), 5.MDPI. doi: 10.3390/s16010005.
Gulizzi, V., Rizzo, P., & Milazzo, A. (2015). On the Repeatability of Electromechanical Impedance for Monitoring of Bonded Joints. AIAA JOURNAL, 53(11), 3479-3482.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/1.J053682.
Gulizzi, V., Rizzo, P., Milazzo, A., & La Malfa Ribolla, E. (2015). An integrated structural health monitoring system based on electromechanical impedance and guided ultrasonic waves. Journal of Civil Structural Health Monitoring, 5(3), 337-352.Springer Nature. doi: 10.1007/s13349-015-0112-0.
LaMalfa Ribolla, E., & Rizzo, P. (2015). Modeling the electromechanical impedance technique for the assessment of dental implant stability. J Biomech, 48(10), 1713-1720.Elsevier. doi: 10.1016/j.jbiomech.2015.05.020.
Li, K., & Rizzo, P. (2015). Energy Harvesting Using an Array of Granules. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 137(4), 041002.ASME International. doi: 10.1115/1.4029735.
Li, K., & Rizzo, P. (2015). Energy harvesting using arrays of granular chains and solid rods. JOURNAL OF APPLIED PHYSICS, 117(21), 215101.AIP Publishing. doi: 10.1063/1.4921856.
Li, K., Rizzo, P., & Bagheri, A. (2015). A parametric study on the optimization of a metamaterial-based energy harvester. SMART MATERIALS AND STRUCTURES, 24(11), 115019.IOP Publishing. doi: 10.1088/0964-1726/24/11/115019.
Pistone, E., & Rizzo, P. (2015). On the use of an array of ultrasonic immersion transducers for the nondestructive testing of immersed plates. NONDESTRUCTIVE TESTING AND EVALUATION, 30(1), 26-38.Taylor & Francis. doi: 10.1080/10589759.2014.979817.
Ribolla, E.L.M., Rizzo, P., & Gulizzi, V. (2015). On the use of the electromechanical impedance technique for the assessment of dental implant stability: Modeling and experimentation. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 26(16), 2266-2280.SAGE Publications. doi: 10.1177/1045389X14554129.
Rizzo, P., La Malfa, E., & Di Cara, A. (2015). A noninvasive approach for the assessment of dental implants stability. Emerging Technologies in Non-Destructive Testing VI - Proceedings of the 6th International Conference on Emerging Technologies in Nondestructive Testing, ETNDT 2016, 315-318.CRC Press. doi: 10.1201/b19381-53.
Bagheri, A., Persano Adorno, D., Rizzo, P., Barraco, R., & Bellomonte, L. (2014). Empirical mode decomposition and neural network for the classification of electroretinographic data. Med Biol Eng Comput, 52(7), 619-628.Springer Nature. doi: 10.1007/s11517-014-1164-8.
Bagheri, A., Pistone, E., & Rizzo, P. (2014). Guided Ultrasonic Wave Imaging for Immersed Plates Based on Wavelet Transform and Probabilistic Analysis. RESEARCH IN NONDESTRUCTIVE EVALUATION, 25(2), 63-81.Taylor & Francis. doi: 10.1080/09349847.2013.837212.
Cerda, F., Chen, S., Bielak, J., Garrett, J.H., Rizzo, P., & Kovacevic, J. (2014). Indirect structural health monitoring of a simplified laboratory-scale bridge model. SMART STRUCTURES AND SYSTEMS, 13(5), 849-868.Techno-Press. doi: 10.12989/sss.2014.13.5.849.
Chen, S., Cerda, F., Rizzo, P., Bielak, J., Garrett, J.H.J., & Kovacevic, J. (2014). Semi-Supervised Multiresolution Classification Using Adaptive Graph Filtering With Application to Indirect Bridge Structural Health Monitoring. IEEE TRANSACTIONS ON SIGNAL PROCESSING, 62(11), 2879-2893.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/TSP.2014.2313528.
Gulizzi, V., Rizzo, P., & Milazzo, A. (2014). Electromechanical impedance method for the health monitoring of bonded joints: Numerical modelling and experimental validation. SDHM Structural Durability and Health Monitoring, 10(1), 19-54.
Li, K., Rizzo, P., & Ni, X. (2014). Alternative Designs of Acoustic Lenses Based on Nonlinear Solitary Waves. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 81(7), 071011.ASME International. doi: 10.1115/1.4027327.
Rizzo, P. (2014). Sensing solutions for assessing and monitoring underwater systems. In Sensor Technologies for Civil Infrastructures. 1, (pp. 525-549).Elsevier. doi: 10.1533/9781782422433.2.525.
Rizzo, P. (2014). Sensing solutions for assessing and monitoring railroad tracks. In Sensor Technologies for Civil Infrastructures. 1, (pp. 497-524).Elsevier. doi: 10.1533/9781782422433.2.497.
Rizzo, P., Ni, X., Nassiri, S., & Vandenbossche, J. (2014). A solitary wave-based sensor to monitor the setting of fresh concrete. Sensors (Basel), 14(7), 12568-12584.MDPI. doi: 10.3390/s140712568.
Rizzo, P., Ni, X., Nassiri, S., & Vandenbossche, J. (2014). A solitary wave-based sensor to monitor the setting of fresh concrete. Sensors (Switzerland), 14(7), 12568-12584. doi: 10.3390/s140712568.
Zhu, X., & Rizzo, P. (2014). Sensor array for the health monitoring of truss structures by means of guided ultrasonic waves. Journal of Civil Structural Health Monitoring, 4(3), 221-234.Springer Nature. doi: 10.1007/s13349-014-0078-3.
Bagheri, A., Li, K., & Rizzo, P. (2013). Reference-free damage detection by means of wavelet transform and empirical mode decomposition applied to Lamb waves. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 24(2), 194-208.SAGE Publications. doi: 10.1177/1045389X12460433.
Berhanu, B., Rizzo, P., & Ochs, M. (2013). Highly Nonlinear Solitary Waves for the Assessment of Dental Implant Mobility. J Appl Mech, 80(1), 0110281-0110288.ASME International. doi: 10.1115/1.4006947.
Cai, L., Rizzo, P., & Al-Nazer, L. (2013). On the coupling mechanism between nonlinear solitary waves and slender beams. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 50(25-26), 4173-4183.Elsevier. doi: 10.1016/j.ijsolstr.2013.08.018.
Cai, L., Yang, J., Rizzo, P., Ni, X., & Daraio, C. (2013). Propagation of highly nonlinear solitary waves in a curved granular chain. GRANULAR MATTER, 15(3), 357-366.Springer Nature. doi: 10.1007/s10035-013-0414-z.
di Scalea, F.L., Rizzo, P., Salamone, S., Bartoli, I., & Al-Nazer, L. (2013). Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws Proof-of-Principle Numerical Simulations. TRANSPORTATION RESEARCH RECORD, 2374(2374), 162-168.SAGE Publications. doi: 10.3141/2374-19.
Ni, X., Cai, L., & Rizzo, P. (2013). A comparative study on three different transducers for the measurement of nonlinear solitary waves. Sensors (Basel), 13(1), 1231-1246.MDPI. doi: 10.3390/s130101231.
Pistone, E., Li, K., & Rizzo, P. (2013). Noncontact monitoring of immersed plates by means of laser-induced ultrasounds. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 12(5-6), 549-565.SAGE Publications. doi: 10.1177/1475921713506767.
Zhu, X., & Rizzo, P. (2013). Guided waves for the health monitoring of sign support structures under varying environmental conditions. STRUCTURAL CONTROL & HEALTH MONITORING, 20(2), 36-52.Hindawi. doi: 10.1002/stc.481.
Ni, X., & Rizzo, P. (2012). Use of highly nonlinear solitary waves in NDT. Materials Evaluation, 70(5), 561-569.
Ni, X., & Rizzo, P. (2012). Highly Nonlinear Solitary Waves for the Inspection of Adhesive Joints. EXPERIMENTAL MECHANICS, 52(9), 1493-1501.Springer Nature. doi: 10.1007/s11340-012-9595-3.
Ni, X., & Rizzo, P. (2012). Use of Highly Nonlinear Solitary Waves in Nondestructive Testing. MATERIALS EVALUATION, 70(5), 561-569.
Ni, X., Rizzo, P., Yang, J., Katri, D., & Daraio, C. (2012). Monitoring the hydration of cement using highly nonlinear solitary waves. NDT & E INTERNATIONAL, 52(November), 76-85.Elsevier. doi: 10.1016/j.ndteint.2012.05.003.
Pistone, E., & Rizzo, P. (2012). Ultrasonic Waves for the Inspection of Underwater Waveguide Structures. 164th Meeting of the Acoustical Society of America, JASA, 32(3), Pt. 2.
Rizzo, P., Yu, L., & Marzani, A. (2012). Structural Health Monitoring of Civil Structures: New Methodologies and Field Applications 2012. Advances in Civil Engineering, 2012(1), 1-2.Hindawi. doi: 10.1155/2012/524396.
Tabrizi, A., Rizzo, P., & Ochs, M.W. (2012). Electromechanical impedance method to assess dental implant stability. SMART MATERIALS AND STRUCTURES, 21(11), 115022.IOP Publishing. doi: 10.1088/0964-1726/21/11/115022.
Vandone, A., Rizzo, P., & Vanali, M. (2012). Two-Stage Algorithm for the Analysis of Infrared Images. Research in Nondestructive Evaluation, 23(2), 69-88.
Vandone, A., Rizzo, P., & Vanali, M. (2012). TWO-STAGE AUTOMATED DEFECT RECOGNITION ALGORITHM FOR THE ANALYSIS OF INFRARED IMAGES. RESEARCH IN NONDESTRUCTIVE EVALUATION, 23(2), 69-88.Taylor & Francis. doi: 10.1080/09349847.2011.630557.
Zhu, X., & Rizzo, P. (2012). A unified approach for the structural health monitoring of waveguides. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 11(6), 629-642.SAGE Publications. doi: 10.1177/1475921712438569.
Boemio, G., Rizzo, P., & De Nardo, L. (2011). Assessment of dental implant stability by means of the electromechanical impedance method. SMART MATERIALS AND STRUCTURES, 20(4), 045008.IOP Publishing. doi: 10.1088/0964-1726/20/4/045008.
Ni, X., Rizzo, P., & Daraio, C. (2011). Actuators for the generation of highly nonlinear solitary waves. Rev Sci Instrum, 82(3), 034902.AIP Publishing. doi: 10.1063/1.3556442.
Ni, X., Rizzo, P., & Daraio, C. (2011). Laser-based excitation of nonlinear solitary waves in a chain of particles. Phys Rev E Stat Nonlin Soft Matter Phys, 84(2 Pt 2), 026601.American Physical Society (APS). doi: 10.1103/PhysRevE.84.026601.
Sale, M., Rizzo, P., & Marzani, A. (2011). Semi-analytical formulation for the guided waves-based reconstruction of elastic moduli. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 25(6), 2241-2256.Elsevier. doi: 10.1016/j.ymssp.2011.02.004.
Spada, A., Giambanco, G., & Rizzo, P. (2011). Elastoplastic Damaging Model for Adhesive Anchor Systems. Part II: Numerical and Experimental Validation. ASCE Journal of Engineering Mechanics, 137(12), 854-861.
Spada, A., Giambanco, G., & Rizzo, P. (2011). Elastoplastic Damaging Model for Adhesive Anchor Systems. Part I: Theoretical Formulation and Numerical Implementation. ASCE Journal of Engineering Mechanics, 137(12), 862-876.
Spada, A., Giambanco, G., & Rizzo, P. (2011). Elastoplastic Damaging Model for Adhesive Anchor Systems. I: Theoretical Formulation and Numerical Implementation. JOURNAL OF ENGINEERING MECHANICS-ASCE, 137(12), 854-861.American Society of Civil Engineers (ASCE). doi: 10.1061/(ASCE)EM.1943-7889.0000287.
Spada, A., Rizzo, P., & Giambanco, G. (2011). Elastoplastic Damaging Model for Adhesive Anchor Systems. II: Numerical and Experimental Validation. JOURNAL OF ENGINEERING MECHANICS, 137(12), 862-876.American Society of Civil Engineers (ASCE). doi: 10.1061/(ASCE)EM.1943-7889.0000288.
Cammarata, M., Rizzo, P., Dutta, D., & Sohn, H. (2010). Application of principal component analysis and wavelet transform to fatigue crack detection in waveguides. SMART STRUCTURES AND SYSTEMS, 6(4), 349-362.Techno-Press. doi: 10.12989/sss.2010.6.4.349.
Kacin, J., Rizzo, P., & Tajari, M. (2010). Fatigue analysis of overhead sign support structures. ENGINEERING STRUCTURES, 32(6), 1659-1670.Elsevier. doi: 10.1016/j.engstruct.2010.02.014.
Rizzo, P. (2010). Water and Wastewater Pipe Nondestructive Evaluation and Health Monitoring: A Review. Advances in Civil Engineering, 2010(1), 1-13.Hindawi. doi: 10.1155/2010/818597.
Rizzo, P., Cammarata, M., Bartoli, I., di Scalea, F.L., Salamone, S., Coccia, S., & Phillips, R. (2010). Ultrasonic Guided Waves‐Based Monitoring of Rail Head: Laboratory and Field Tests. Advances in Civil Engineering, 2010(1), 1-13.Hindawi. doi: 10.1155/2010/291293.
Rizzo, P., Han, J.G., & Ni, X.L. (2010). Structural Health Monitoring of Immersed Structures by Means of Guided Ultrasonic Waves. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 21(14), 1397-1407.SAGE Publications. doi: 10.1177/1045389X10384170.
Rizzo, P., Ni, Y.Q., & Zhu, J. (2010). Structural Health Monitoring for Civil Structures: From the Lab to the Field. Advances in Civil Engineering, 2010(1), 1.Hindawi. doi: 10.1155/2010/165132.
Rizzo, P., Spada, A., Degala, S., & Giambanco, G. (2010). Acoustic Emission Monitoring of Chemically Bonded Anchors. JOURNAL OF NONDESTRUCTIVE EVALUATION, 29(1), 49-61.Springer Nature. doi: 10.1007/s10921-010-0065-5.
Zhu, X.P., Rizzo, P., Marzani, A., & Bruck, J. (2010). Ultrasonic guided waves for nondestructive evaluation/structural health monitoring of trusses. MEASUREMENT SCIENCE AND TECHNOLOGY, 21(4), 045701.IOP Publishing. doi: 10.1088/0957-0233/21/4/045701.
Cammarata, M., Dutta, D., Sohn, H., Rizzo, P., & Harries, K.A. (2009). Advanced Ultrasonic Structural Monitoring of Waveguides. Advances in Science and Technology, 56, 477-482.Trans Tech Publications. doi: 10.4028/www.scientific.net/ast.56.477.
Degala, S., Rizzo, P., Ramanathan, K., & Harries, K.A. (2009). Acoustic emission monitoring of CFRP reinforced concrete slabs. CONSTRUCTION AND BUILDING MATERIALS, 23(5), 2016-2026.Elsevier. doi: 10.1016/j.conbuildmat.2008.08.026.
Dutta, D., Sohn, H., Harries, K.A., & Rizzo, P. (2009). A Nonlinear Acoustic Technique for Crack Detection in Metallic Structures. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 8(3), 251-262.SAGE Publications. doi: 10.1177/1475921709102105.
Dutta, D., Sohn, H., Harries, K.A., & Rizzo, P. (2009). A Nonlinear Acoustic Technique for Crack Detection in Metallic Structures. (vol 8, pg 251, 2009). STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 8(6), 573.SAGE Publications. doi: 10.1177/1475921709107051.
Rizzo, P., Bordoni, G., Marzani, A., & Vipperman, J. (2009). Localization of sound sources by means of unidirectional microphones. MEASUREMENT SCIENCE AND TECHNOLOGY, 20(5), 055202.IOP Publishing. doi: 10.1088/0957-0233/20/5/055202.
Rizzo, P., Cammarata, M., Dutta, D., Sohn, H., & Harries, K. (2009). An unsupervised learning algorithm for fatigue crack detection in waveguides. SMART MATERIALS AND STRUCTURES, 18(2), 025016.IOP Publishing. doi: 10.1088/0964-1726/18/2/025016.
Spada, A., Giambanco, G., & Rizzo, P. (2009). Damage and plasticity at the interfaces in composite materials and structures. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 198(49-52), 3884-3901.Elsevier. doi: 10.1016/j.cma.2009.08.024.
Marzani, A., Viola, E., Bartoli, I., di Scalea, F.L., & Rizzo, P. (2008). A semi-analytical finite element formulation for modeling stress wave propagation in axisymmetric damped waveguides. JOURNAL OF SOUND AND VIBRATION, 318(3), 488-505.Elsevier. doi: 10.1016/j.jsv.2008.04.028.
Rizzo, P. (2008). Development of an undergraduate course on NDT. MATERIALS EVALUATION, 66(9), 914-915.
Sabra, K.G., Srivastava, A., Lanza di Scalea, F., Bartoli, I., Rizzo, P., & Conti, S. (2008). Structural health monitoring by extraction of coherent guided waves from diffuse fields. J Acoust Soc Am, 123(1), EL8-E13.Acoustical Society of America (ASA). doi: 10.1121/1.2820800.
Rizzo, P., Bartoli, I., Cammarata, M., & Coccia, S. (2007). Digital signal processing for rail monitoring by means of ultrasonic guided waves. INSIGHT, 49(6), 327-332.British Institute of Non-Destructive Testing (BINDT). doi: 10.1784/insi.2007.49.6.327.
Rizzo, P., Sorrivi, E., di Scalea, F.L., & Viola, E. (2007). Wavelet-based outlier analysis for guided wave structural monitoring: Application to multi-wire strands. JOURNAL OF SOUND AND VIBRATION, 307(1-2), 52-68.Elsevier. doi: 10.1016/j.jsv.2007.06.058.
Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I., & Fateh, M. (2006). Laser/Air-Coupled Hybrid Detection in Rail Tracks: Status of FRA Prototype Development at UC San Diego. Transportation Research Record, Journal of the Transportation Research Board, 1943, 57-64.
Matta, F., Rizzo, P., Karbhari, V.M., & di Scalea, F.L. (2006). Acoustic emission damage assessment of steel/CFRP bonds for rehabilitation. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 10(3), 265-274.American Society of Civil Engineers (ASCE). doi: 10.1061/(ASCE)1090-0268(2006)10:3(265).
Rizzo, P. (2006). Ultrasonic wave propagation in progressively loaded multi-wire strands. EXPERIMENTAL MECHANICS, 46(3), 297-306.Springer Nature. doi: 10.1007/s11340-006-7248-0.
Rizzo, P., & di Scalea, F.L. (2006). Wavelet-based feature extraction for automatic defect classification in strands by ultrasonic structural monitoring. SMART STRUCTURES AND SYSTEMS, 2(3), 253-274.Techno-Press. doi: 10.12989/sss.2006.2.3.253.
Rizzo, P., & di Scalea, F.L. (2006). Feature extraction for defect detection in strands by guided ultrasonic waves. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 5(3), 297-308.SAGE Publications. doi: 10.1177/1475921706067742.
di Scalea, F.L., Bartoli, I., Rizzo, P., & Fateh, M. (2005). High-speed defect detection in rails by noncontact guided ultrasonic testing. RAILROADS: INTERCITY RAIL PASSENGER; TRACK DESIGN AND MAINTENANCE; AND OTHER TOPICS, 1916(1916), 66-77.SAGE Publications. doi: 10.3141/1916-10.
di Scalea, F.L., Rizzo, P., Coccia, S., Bartoli, I., Fateh, M., Viola, E., & Pascale, G. (2005). Non-contact ultrasonic inspection of rails and signal processing for automatic defect detection and classification. INSIGHT, 47(6), 346-353.British Institute of Non-Destructive Testing (BINDT). doi: 10.1784/insi.47.6.346.66449.
Rizzo, P., & di Scalea, F.L. (2005). Ultrasonic inspection of multi-wire steel strands with the aid of the wavelet transform. SMART MATERIALS AND STRUCTURES, 14(4), 685-695.IOP Publishing. doi: 10.1088/0964-1726/14/4/027.
Rizzo, P., Bartoli, I., Marzani, A., & di Scalea, F.L. (2005). Defect classification in pipes by neural networks using multiple guided ultrasonic wave features extracted after wavelet processing. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 127(3), 294-303.ASME International. doi: 10.1115/1.1990213.
Rizzo, P., Bartoli, I., Marzani, A., & Lanza di Scalea, F. (2005). Defect Classification in Pipes by Neural Networks using Multiple Guided Ultrasonic Wave Features. ASME Journal of Pressure Vessel Technology, Special Issue on the Nondestructive Evaluation of Pipeline and Vessel Structures, 127(3), 294-303.
Rizzo, P., di Scalea, F.L., Banerjee, S., & Mal, A. (2005). Ultrasonic characterization and inspection of open cell foams. JOURNAL OF ENGINEERING MECHANICS, 131(11), 1200-1208.American Society of Civil Engineers (ASCE). doi: 10.1061/(ASCE)0733-9399(2005)131:11(1200).
di Scalea, F.L., Rizzo, P., & Marzani, A. (2004). Assessment of bond state in lap-shear joints by guided wave transmission monitoring. INSIGHT, 46(3), 135-+.British Institute of Non-Destructive Testing (BINDT). doi: 10.1784/insi.46.3.135.55527.
Lanza di Scalea, F., Rizzo, P., & Marzani, A. (2004). Propagation of ultrasonic guided waves in lap-shear adhesive joints: case of incident a0 Lamb wave. J Acoust Soc Am, 115(1), 146-156.Acoustical Society of America (ASA). doi: 10.1121/1.1630999.
Rizzo, P., & Lanza di Scalea, F. (2004). Monitoring in Cable Stays via Guided Wave Magnetostrictive Ultrasonics. Materials Evaluation, 62(10), 1057-1065.
Rizzo, R., & di Scalea, F.L. (2004). Wave propagation in multi-wire strands by Wavelet-based laser ultrasound. EXPERIMENTAL MECHANICS, 44(4), 407-415.Springer Science and Business Media LLC. doi: 10.1177/0014485104044321.
di Scalea, F.L., Rizzo, P., & Seible, F. (2003). Stress measurement and defect detection in steel strands by guided stress waves. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 15(3), 219-227.American Society of Civil Engineers (ASCE). doi: 10.1061/(ASCE)0899-1561(2003)15:3(219).
Lanza di Scalea, F., Rizzo, P., & Seible, F. (2003). Stress Measurement and Defect Detection in Steel Strands by Guided Stress Waves. ASCE Journal of Materials in Civil Engineering, Special Issue on NDE, 15(3), 211-304.
Rizzo, P., & di Scalea, F.L. (2003). Effect of frequency on the acoustoelastic response of steel bars. EXPERIMENTAL TECHNIQUES, 27(6), 40-43.Springer Nature. doi: 10.1111/j.1747-1567.2003.tb00136.x.
Rizzo, P., & di Scalea, F.L. (2001). Acoustic emission monitoring of carbon-fiber-reinforced-polymer bridge stay cables in large-scale testing. EXPERIMENTAL MECHANICS, 41(3), 282-290.Springer Nature. doi: 10.1007/BF02323146.
Lanza di Scalea, F., Rizzo, P., Karbhari, V.M., & Seible, F. (2000). Health Monitoring of UCSD's I-5/Gilman Advanced Technology Bridge. Smart Materials Bulletin, 1(2), 6-10.
Nasrollahi, A., Deng, W., & Rizzo, P. (2017). Highly nonlinear solitary waves to estimate the modulus of concrete with different water-to-cement ratios. In Wu, H.F., Gyekenyesi, A.L., Shull, P.J., & Yu, T.Y. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 10169, (p. 101691c-101691c-8).SPIE, the international society for optics and photonics. doi: 10.1117/12.2258556.
NASROLLAHI, A., DENG, W., & RIZZO, P. (2017). Recent Progress on a Multi-Modal SHM System for Waveguides. In Structural Health Monitoring 2017, 2, (pp. 2290-2296).DEStech Publications. doi: 10.12783/shm2017/14122.
Nasrollahi, A., Ma, Z., & Rizzo, P. (2017). Nondestructive assessment of waveguides using an integrated electromechanical impedance and ultrasonic waves approach. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 10170, (p. 101701c-101701c-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.2258554.
Rizzo, P., & Nasrollahi, A. (2017). Highly nonlinear solitary waves propagating in a granular medium for nondestructive testing applications (aimeta 2017). In AIMETA 2017 - Proceedings of the 23rd Conference of the Italian Association of Theoretical and Applied Mechanics, 1, (pp. 1199-1204).
RIZZO, P., & RIBOLLA, E.L.M. (2017). Electromechanical Impedance Method to Assess the Stability of Dental Implants. In Structural Health Monitoring 2017, 2, (pp. 2427-2433).DEStech Publications. doi: 10.12783/shm2017/14139.
Bagheri, A., La Malfa Ribolla, E., & Rizzo, P. (2015). Granular chains for the assessment of thermal stress in slender structures. In Lynch, J.P. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 9435, (p. 94350l-94350l-10).SPIE, the international society for optics and photonics. doi: 10.1117/12.2083869.
Bagheri, A., Rizzo, P., & Al-Nazer, L. (2015). Solitary Waves to Infer Axial Stress in Slender Structures: A Numerical Model. In Conference Proceedings of the Society for Experimental Mechanics Series, 7, (pp. 47-57).Springer Nature. doi: 10.1007/978-3-319-15230-1_6.
Gulizzi, V., Rizzo, P., & Milazzo, A. (2015). On the repeatability of the EMI for the monitoring of bonded joints. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 9438, (p. 943827-943827-10).SPIE, the international society for optics and photonics. doi: 10.1117/12.2084023.
La Malfa Ribolla, E., & Rizzo, P. (2015). Modelling the Electromechanical Impedance Method for the Prediction of the Biomechanical Behavior of Dental Implant Stability. In Procedia Engineering, 109, (pp. 128-134).Elsevier. doi: 10.1016/j.proeng.2015.06.219.
Li, K., & Rizzo, P. (2015). On the use of nonlinear solitary waves for energy harvesting. In Liao, W.H. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 9431, (p. 943103-943103-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.2083872.
Rizzo, P., Bagheri, A., & La Malfa, E. (2015). Highly Nonlinear Solitary Waves for the NDT of slender beams. In Emerging Technologies in Non-Destructive Testing VI - Proceedings of the 6th International Conference on Emerging Technologies in Nondestructive Testing, ETNDT 2016, (pp. 173-177).CRC Press. doi: 10.1201/b19381-28.
RIZZO, P., GULIZZI, V., & MILAZZO, A. (2015). An Integrated SHM System Based on Electromechanical Impedance and Guided Ultrasonic Waves. In Structural Health Monitoring 2015, 2, (pp. 715-722).DEStech Publications. doi: 10.12783/shm2015/91.
Rizzo, P., Pistone, E., & Bagheri, A. (2015). Guided ultrasonic waves for the NDT of immersed plates. In Emerging Technologies in Non-Destructive Testing VI - Proceedings of the 6th International Conference on Emerging Technologies in Nondestructive Testing, ETNDT 2016, (pp. 153-158).CRC Press. doi: 10.1201/b19381-24.
Bagheri, A., Rizzo, P., & Pistone, E. (2014). On the processing of leaky guided waves propagating in immersed plates. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 9064, (p. 90640w-90640w-7).SPIE, the international society for optics and photonics. doi: 10.1117/12.2042255.
Cai, L., Rizzo, P., Li, K., & Al-Nazer, L. (2014). Coupling mechanism of granular medium and slender beams. In Wu, H.F., Yu, T.Y., Gyekenyesi, A.L., & Shull, P.J. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 9063, (p. 90631z-90631z-8).SPIE, the international society for optics and photonics. doi: 10.1117/12.2044144.
Chen, A., Frangopol, D., Ruan, X., Lederman, G., Wang, Z., Bielak, J., Noh, H., Garrett, J., Chen, S., Kovačević, J., Cerda, F., & Rizzo, P. (2014). Damage quantification and localization algorithms for indirect SHM of bridges. In Bridge Maintenance, Safety, Management and Life Extension - Proceedings of the 7th International Conference of Bridge Maintenance, Safety and Management, IABMAS 2014, (pp. 640-647).Taylor & Francis. doi: 10.1201/b17063-93.
Chen, S., Sandryhaila, A., Lederman, G., Wang, Z., Moura, J.M.F., Rizzo, P., Bielak, J., Garrett, J.H., & Kovačević, J. (2014). Signal Inpainting on Graphs via Total Variation Minimization. In 2014 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), (pp. 8267-8271).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/icassp.2014.6855213.
Gulizzi, V., Rizzo, P., & Milazzo, A. (2014). On the use of the EMI for the health monitoring of bonded elements. In Lynch, J.P., Wang, K.W., & Sohn, H. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 9061, (p. 906104-906104-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.2044104.
La Malfa Ribolla, E., Rizzo, P., & Gulizzi, V. (2014). On the use of EMI for the assessment of dental implant stability. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 9064, (p. 90640i-90640i-10).SPIE, the international society for optics and photonics. doi: 10.1117/12.2043823.
Phillips, R., di Scalea, F.L., Nucera, C., Rizzo, P., & Al-Nazer, L. (2014). Ultrasonic Tomography for Rail Flaw Imaging. In 2014 Joint Rail Conference, (p. v001t01a006).ASME International. doi: 10.1115/jrc2014-3736.
Rizzo, P., Bagheri, A., & Li, K. (2014). Guided Ultrasonic Waves for the Nondestructive Evaluation Imaging of Pipes. In Shale Energy Engineering 2014, (pp. 151-158).American Society of Civil Engineers (ASCE). doi: 10.1061/9780784413654.016.
Antaya, C.L., Bilec, M.M., Rizzo, P., & Landis, A.E. (2013). Incorporating sustainability into the civil engineering curriculum via cross course collaborations. In ASEE Annual Conference and Exposition, Conference Proceedings.
Cai, L., Li, K., & Rizzo, P. (2013). On the use of solitary waves for the prediction of structural buckling of simple structures. In Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring, IWSHM 2013, 2, (pp. 2515-2522).
Cai, L., Ni, X., & Rizzo, P. (2013). Design of alternative sensors for NDE/SHM applications based on highly nonlinear solitary waves. In Lynch, J.P., Yun, C.B., & Wang, K.W. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 8692, (p. 869226-869226-10).SPIE, the international society for optics and photonics. doi: 10.1117/12.2009236.
Chen, S., Cerdai, F., Guo, J., Harley, J.B., Shi, Q., Rizzo, P., Bielak, J., Garrett, J.H., & Kovačevič, J. (2013). MULTIRESOLUTION CLASSIFICATION WITH SEMI-SUPERVISED LEARNING FOR INDIRECT BRIDGE STRUCTURAL HEALTH MONITORING. In 2013 IEEE International Conference on Acoustics, Speech and Signal Processing, (pp. 3412-3416).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/icassp.2013.6638291.
Pistone, E., Bagheri, A., Li, K., & Rizzo, P. (2013). Advancements on the inspection of underwater plates by means of guided waves. In Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring, IWSHM 2013, 1, (pp. 887-894).
Pistone, E., Bagheri, A., Li, K., & Rizzo, P. (2013). Signal processing for the inspection of immersed structures. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 8695, (p. 86951a-86951a-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.2008894.
Rizzo, P. (2013). NDE/SHM of Underwater Structures: A Review. In Advances in Science and Technology, 83, (pp. 208-216).Trans Tech Publications. doi: 10.4028/www.scientific.net/ast.83.208.
Rizzo, P., Pistone, E., Werntges, P., Han, J., & Ni, X. (2013). Inspection of Underwater Metallic Plates by means of Laser Ultrasound. In RILEM Bookseries, 6, (pp. 675-680).Springer Nature. doi: 10.1007/978-94-007-0723-8_96.
Wang, Z., Chen, S., Lederman, G., Cerda, F., Bielak, J., Garrett, J.H., Rizzo, P., & Kovačević, J. (2013). Comparison of Sparse Representation and Fourier Discriminant Methods: Damage Location Classification in Indirect Lab-scale Bridge Structural Health Monitoring. In Structures Congress 2013, (pp. 436-446).American Society of Civil Engineers (ASCE). doi: 10.1061/9780784412848.039.
Cerda, F., Garrett, J., Bielak, J., Barrera, J., Zhuang, Z., Chen, S., McCann, M., Kovaćević, J., & Rizzo, P. (2012). Indirect structural health monitoring in bridges: Scale experiments. In Bridge Maintenance, Safety, Management, Resilience and Sustainability - Proceedings of the Sixth International Conference on Bridge Maintenance, Safety and Management, (pp. 346-353).
Ni, X., & Rizzo, P. (2012). Recent advancement on the NDE of structures by means of highly nonlinear solitary waves. In Tomizuka, M., Yun, C.B., & Lynch, J.P. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 8345, (p. 83450e-83450e-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.914802.
Rizzo, P., Tabrizi, A., Berhanu, B., & Ochs, M.W. (2012). Nondestructive methods to assess dental implant stability. In Varadan, V.K. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 8344, (p. 83441e-83441e-8).SPIE, the international society for optics and photonics. doi: 10.1117/12.914793.
Vandone, A., Rizzo, P., & Vanali, M. (2012). Image processing for the laser spot thermography of composite materials. In Gyekenyesi, A.L. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 8347, (p. 83471l-83471l-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.914713.
Ni, X., & Rizzo, P. (2011). SHM of structural materials by means of highly nonlinear solitary waves. In Structural Health Monitoring 2011: Condition-Based Maintenance and Intelligent Structures - Proceedings of the 8th International Workshop on Structural Health Monitoring, 2, (pp. 2568-2575).
Ni, X., Nassiri, S., Rizzo, P., & Vandenbossche, J. (2011). Highly nonlinear solitary waves-based sensor for monitoring concrete. In Tomizuka, M. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7981, (p. 79812l-79812l-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.880280.
Ni, X., Nassiri, S., Rizzo, P., & Vandenbossche, J. (2011). Highly Nonlinear Solitary Waves-based sensor for Monitoring Concrete. doi: 10.1117/12.880280.
Pistone, E., Rizzo, P., & Werntges, P. (2011). Bulk Waves for the Nondestructive Inspection of Immersed Structures. In Conference Proceedings of the Society for Experimental Mechanics Series, 6, (pp. 643-649).Springer New York. doi: 10.1007/978-1-4614-0222-0_76.
Rizzo, P., & Pistone, E. (2011). Effect of water temperature on the laser-based ultrasonic testing of immersed structures. In Structural Health Monitoring 2011: Condition-Based Maintenance and Intelligent Structures - Proceedings of the 8th International Workshop on Structural Health Monitoring, 1, (pp. 1158-1164).
Rizzo, P., Boemio, G., & de Nardo, L. (2011). Use of the electro-mechanical impedance method for the assessment of dental implant stability. In Varadan, V.K. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7980, (p. 79800v-79800v-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.879270.
Rizzo, P., Tajari, & Spada, A. (2011). Microphones' directivity for the localization of sound sources. In Carapezza, E.M. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 8046, (p. 804603-804603-7).SPIE, the international society for optics and photonics. doi: 10.1117/12.884626.
Zhu, X., & Rizzo, P. (2011). Combining guided waves and electromechanical impedance method for SHM applications. In Structural Health Monitoring 2011: Condition-Based Maintenance and Intelligent Structures - Proceedings of the 8th International Workshop on Structural Health Monitoring, 2, (pp. 2584-2591).
Zhu, X., & Rizzo, P. (2011). Guided ultrasonic waves for the health monitoring of existing sign support structures. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7984, (p. 79840e-79840e-8).SPIE, the international society for optics and photonics. doi: 10.1117/12.879268.
Zhu, X.P., Rizzo, P., & Bruck, J. (2011). Sign Support Structures Tested by means of Guided Waves. In Conference Proceedings of the Society for Experimental Mechanics Series, 6, (pp. 409-416).Springer Nature. doi: 10.1007/978-1-4614-0222-0_50.
Annamdas, V.G.M., & Rizzo, P. (2010). Monitoring concrete by means of embedded sensors and electromechanical impedance technique. In Tomizuka, M. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7647, (p. 76471z-76471z-8).SPIE, the international society for optics and photonics. doi: 10.1117/12.847687.
Marzani, A., Mazzotti, M., Viola, E., De Marchi, L., Speciale, N., & Rizzo, P. (2010). A genetic algorithm based procedure for the constitutive characterization of composite plates using dispersive guided waves data. In Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010, (pp. 305-308).
Ni, X., Garden, R., & Rizzo, P. (2010). Laser induced highly nonlinear solitary waves for structural NDE. In Tomizuka, M. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7647, (p. 76470s-76470s-7).SPIE, the international society for optics and photonics. doi: 10.1117/12.847428.
Zhu, X., Rizzo, P., & Bruck, J. (2010). Ultrasonic Guided Waves SHM for sign support structure. In Proceedings of the 5th European Workshop - Structural Health Monitoring 2010, (pp. 1241-1246).
Zhu, X.P., Rizzo, P., & Bruck, J. (2010). Guided waves for SHM of a large truss structure. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7650(PART 1), (p. 76500o-76500o-8).SPIE, the international society for optics and photonics. doi: 10.1117/12.847335.
Annamdas, V.G.M., & Rizzo, P. (2009). Influence of the excitation frequency in the electromechanical impedance method for SHM applications. In Meyendorf, N.G., Peters, K.J., & Ecke, W. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 7293, (p. 72930v-72930v-11).SPIE, the international society for optics and photonics. doi: 10.1117/12.815366.
Khatri, D., Daraio, C., & Rizzo, P. (2009). Coupling of highly nonlinear waves with linear elastic media. In Proceedings of SPIE--the International Society for Optical Engineering, 7292(PART 1), (p. 72920p-72920p-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.817574.
Marzani, A., De Marchi, L., Rizzo, P., & Speciale, N. (2009). High Frequency Guided Waves in a 7 Wire Strand: Warped Frequency Transform for Spectro-Temporal Characterization. (pp. 1503-1506). doi: 10.1109/ULTSYM.2009.0365.
Marzani, A., De Marchi, L., Speciale, N., & Rizzo, P. (2009). High frequency guided waves in a 7 wire strand: Warped Frequency Transform for spectra-temporal characterization. In 2009 IEEE International Ultrasonics Symposium, (pp. 1503-1506).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/ultsym.2009.5441827.
Ni, X., Rizzo, P., & Daraio, C. (2009). Novel sensor technology for NDE of concrete. In Proceedings of SPIE--the International Society for Optical Engineering, 7292(PART 1), (p. 729218-729218-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.815510.
Nl, X., Garden, R., & Rizzo, P. (2009). Novel actuator based on the stress wave propagation in highly nonlinear materials. In Structural Health Monitoring 2009: From System Integration to Autonomous Systems - Proceedings of the 7th International Workshop on Structural Health Monitoring, IWSHM 2009, 1, (pp. 996-1003).
Rizzo, P., Bordoni, G., & Marzani, A. (2009). Use of unidirectional microphones and signal processing for the localization of sound sources. In Kadar, I. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7336, (p. 73361f-73361f-10).SPIE, the international society for optics and photonics. doi: 10.1117/12.819271.
Rizzo, P., Cammarata, M., Dutta, D., & Sohn, H. (2009). Outlier analysis and principal component analysis to detect fatigue cracks in waveguides. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 7295, (p. 72950s-72950s-9).SPIE, the international society for optics and photonics. doi: 10.1117/12.815512.
Rizzo, P., Spada, A., & Giambanco, G. (2009). SHM of chemically bonded anchors by means of acoustic emission. In Structural Health Monitoring 2009: From System Integration to Autonomous Systems - Proceedings of the 7th International Workshop on Structural Health Monitoring, IWSHM 2009, 2, (pp. 2043-2050).
Sale, M., Marzani, A., & Rizzo, P. (2009). Guided Waves Based Approach for the Reconstruction of the Elastic Moduli of Plates. In 2009 IEEE International Ultrasonics Symposium, (pp. 1499-1502).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/ultsym.2009.5441836.
Sale, M., Rizzo, P., & Marzani, A. (2009). Guided Waves Based Approach for the Reconstruction of the Elastic Moduli of Plates. (pp. 1499-1502). doi: 10.1109/ULTSYM.2009.0364.
Coccia, S., Bartoli, I., Rizzo, P., Scalea, F.L.D., Fateh, M., & Yang, T.L. (2008). Non-contact ultrasonic rail flaw detection. In Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, (p. 329).
Degala, S., Rizzo, P., Ramanathan, K., & Harries, K.A. (2008). Acoustic emission monitoring of externally bonded FRP-reinforced concrete. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 6935, (p. 69351g-69351g-11).SPIE, the international society for optics and photonics. doi: 10.1117/12.775865.
Dutta, D., Sohn, H., Harries, K., & Rizzo, P. (2008). A nonlinear acoustic technique for crack detection in metallic structures. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 6935, (p. 693511-693511-10).SPIE, the international society for optics and photonics. doi: 10.1117/12.776360.
Khatri, D., Daraio, C., & Rizzo, P. (2008). Highly nonlinear waves' sensor technology for highway infrastructures. In Shull, P.J., Wu, H.F., Diaz, A.A., & Vogel, D.W. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 6934, (p. 69340u-69340u-8).SPIE, the international society for optics and photonics. doi: 10.1117/12.775848.
Bartoli, I., Marzani, A., di Scalea, F.L., Rizzo, P., Viola, E., Sorrivi, E., & Phillips, R. (2007). SAFE modeling of waves for the structural health monitoring of prestressing tendons. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 6532, (p. 65320d-65320d-12).SPIE, the international society for optics and photonics. doi: 10.1117/12.715442.
Bartoli, I., Marzani, A., Lanza di Scalea, F., Rizzo, P., Viola, E., Sorrivi, E., & Phillips, R. (2007). SAFE modeling of waves for the structural health monitoring of prestressing tendons. doi: 10.1117/12.740339..
Bartoli, I., Rizzo, P., Lanza Di Scalea, F., Marzani, A., Sorrivi, E., & Viola, E. (2007). Structural health monitoring of strands in PC structures by embedded sensors and ultrasonic guided waves. In Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures, 2, (pp. 1029-1036).
Coccia, S., Bartoli, I., Di Scalea, F.L., Rizzo, P., & Fateh, M. (2007). Non-contact ultrasonic rail defect detection system: Prototype development and field testing. In Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007, 2, (pp. 1223-1230).
Rizzo, P., Coccia, S., di Scalea, F.L., Bartoli, I., & Fateh, M. (2007). Non-contact rail flaw detection system: first field test. In Tomizuka, M., Yun, C.B., & Giurgiutiu, V. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 6529, (p. 65293w-65293w-11).SPIE, the international society for optics and photonics. doi: 10.1117/12.715444.
Rizzo, P., Debdhanit, Y., Kabara, J., Zadorozhny, V., Harries, K., & Tipper, D. (2007). Stress wave-based bridge monitoring system using wireless sensor networks. In Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007, 2, (pp. 1255-1261).
di Scalea, F.L., Rizzo, P., Coccia, S., Bartoli, I., & Fateh, M. (2006). Laser-air-coupled hybrid noncontact system for defect detection in rail tracks: Status of FRA prototype development at University of California-San Diego. In RAILWAYS, 1943(1943), (pp. 57-64).SAGE Publications. doi: 10.3141/1943-08.
Di Scalea, F.L., Rizzo, P., Coccia, S., Bartoli, I., & Fateh, M. (2006). Development of a non-contact defect detection system for railroad tracks for the US federal railroad administration. In Proceedings of the 3rd European Workshop - Structural Health Monitoring 2006, (pp. 767-774).Destech Pubns Inc.
Matt, H., Bartoli, I., Salamone, S., Rizzo, P., Dl Scalea, F.L., Park, G., & Farrar, C. (2006). Automated damage detection in UAV wing skin-to-spar joints based on outlier analysis of guided wave energy. In Proceedings of the 3rd European Workshop - Structural Health Monitoring 2006, (pp. 1012-1019).
Rizzo, P., Coccia, S., di Scalea, F.L., Bartoli, I., & Fateh, M. (2006). Unsupervised learning algorithm for high-speed defect detection in rails by laser/air-coupled non-contact ultrasonic testing. In Tomizuka, M., Yun, C.B., & Giurgiutiu, V. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 6174, (p. 61742g-61742g-12).SPIE, the international society for optics and photonics. doi: 10.1117/12.643892.
Rizzo, P., Sorrivi, E., di Scalea, F.L., & Viola, E. (2006). Damage detection in multi-wire strands by discrete wavelet-based outlier analysis and embedded guided ultrasonic waves. In Lindner, D.K. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 6166, (p. 61660u-61660u-12).SPIE, the international society for optics and photonics. doi: 10.1117/12.655362.
Matt, H., Bartoli, I., di Scalea, F.L., Marzani, A., Coccia, S., Oliver, J., Kosmatka, J., Rizzo, P., & Restivo, G. (2005). A guided-wave system for monitoring the wing skin-to-spar bond in unmanned aerial vehicles. In Tomizuka, M. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 5765(PART 2), (pp. 758-768).SPIE, the international society for optics and photonics. doi: 10.1117/12.599061.
Rizzo, P., & di Scalea, F.L. (2005). Wavelet coefficient analysis for the quantitative determination of damage in tendons and cables. In Tomizuka, M. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 5765(PART 2), (pp. 863-872).SPIE, the international society for optics and photonics. doi: 10.1117/12.598304.
Rizzo, P., Bartoli, I., di Scalea, F.L., Coccia, S., & Fateh, M. (2005). High-speed defect detection in rails by non-contact guided ultrasonic testing. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 5768, (pp. 274-284).SPIE, the international society for optics and photonics. doi: 10.1117/12.599060.
di Scalea, F.L., Rizzo, P., & Marzani, A. (2004). Propagation of ultrasonic guided waves in lap-shear adhesive joints. In Kundu, T. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 5394, (pp. 78-88).SPIE, the international society for optics and photonics. doi: 10.1117/12.539982.
Marzani, A., Rizzo, P., di Scalea, F.L., & Benzoni, G. (2004). Mobile acoustic system for the detection of surface-breaking cracks in pavement. In Udd, E., & Inaudi, D. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 5384, (pp. 98-107).SPIE, the international society for optics and photonics. doi: 10.1117/12.539991.
Rizzo, P., & di Scalea, F.L. (2004). Discrete wavelet transform to improve guided-wave-based health monitoring of tendons and cables. In Liu, S.C. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 5391, (pp. 523-532).SPIE, the international society for optics and photonics. doi: 10.1117/12.539847.
Rizzo, P., & di Scalea, F.L. (2004). Load measurement and health monitoring in cable stays via guided wave magnetostrictive ultrasonics. In MATERIALS EVALUATION, 62(10), (pp. 1057-1065).
Rizzo, P., Palmer, M.D., & di Scalea, F.L. (2003). Ultrasonic characterization of steel rods for health monitoring of civil structures. In Liu, S.C. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 5057, (pp. 75-84).SPIE, the international society for optics and photonics. doi: 10.1117/12.482384.
Rizzo, P., & di Scalea, F.L. (2002). Monitoring steel strands via ultrasonic measurements. In Liu, S.C., & Pines, D.J. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 4696, (pp. 62-73).SPIE, the international society for optics and photonics. doi: 10.1117/12.472578.
Rizzo, P., & di Scalea, F.L. (2001). Acoustic emission monitoring of CFRP cables for cable-stayed bridges. In Chase, S.B., & Aktan, A.E. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 4337, (pp. 129-138).SPIE, the international society for optics and photonics. doi: 10.1117/12.435585.