(2004) Robert O. Agbede Award for Diversity (Honorable Mention), School of Engineering, University of Pittsburgh.
(1996) Outstanding Alumnus, College of Engineering, The Ohio State University.
(1996) Elected Fellow of ASM International.
(1994) Andrew Carnegie Lecturer, ASM International.
(1992) William Kepler Whiteford Professorship, School of Engineering.
(1989) Bunshah Award for Best Paper in Coatings for Use at High Temperature Symposium of the International Conference on Metallurgical Coatings, (with F. S. Pettit).
(1987) University of Pittsburgh, School of Engineering, Board of Visitors, Outstanding Faculty Award.
(1987) Chairman of Gordon Research Conference for High Temperature Corrosion.
(1986) Symposium of the International Conference on Metallurgical Coatings, (with J. Caola and F. S. Pettit).
(1975) Outstanding Teacher Award, School of Engineering, University of Pittsburgh.
(1966 - 1968) NSF Traineeship, The Ohio State University.
(1965 - 1966) Inland Steel Fellowship, The Ohio State University.
Bunshah Award for Best Paper in Structure/Property Relationship.
Member, International Advisory Editorial Board for Materials at High Temperature.
Member, Editorial Advisory Board, Oxidation of Metals.
Ph.D., Metallurgical Engineering, Ohio State University, 1968
B.S., Metallurgical Engineering, Carnegie Institute of Technology, 1964
Holcomb, G.R., Lukaszewicz, M., Simms, N.J., Howard, B.H., Yanar, N.M., & Meier, G.H. (2024). Hydrogen transport during steam oxidation of iron and nickel alloys. Materials at High Temperatures, 41(4), 531-547.Informa UK Limited. doi: 10.1080/09603409.2019.1582199.
Meier, G.H. (2022). Current Aspects of Deposit-Induced Corrosion. OXIDATION OF METALS, 98(1-2), 1-41.Springer Science and Business Media LLC. doi: 10.1007/s11085-020-10015-6.
Kistler, E., Chen, W.T., Meier, G.H., & Gleeson, B. (2019). A new solid-state mode of hot corrosion at temperatures below 700°C. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 70(8), 1346-1359.Wiley. doi: 10.1002/maco.201810751.
Alvarado-Orozco, J.M., Garcia-Herrera, J.E., Gleeson, B., Pettit, F.S., & Meier, G.H. (2018). Reinterpretation of Type II Hot Corrosion of Co-Base Alloys Incorporating Synergistic Fluxing. OXIDATION OF METALS, 90(5-6), 527-553.Springer Science and Business Media LLC. doi: 10.1007/s11085-018-9853-6.
Garcia-Fresnillo, L., Niewolak, L., Quadakkers, W.J., & Meier, G.H. (2018). Influence of Alloying Elements on the Behavior of Different Ferritic Steels as Candidate Materials for SOFC Interconnect. OXIDATION OF METALS, 89(1-2), 61-80.Springer Science and Business Media LLC. doi: 10.1007/s11085-017-9777-6.
Garcia-Fresnillo, L., Alvarado-Orozco, J.M., & Meier, G.H. (2017). Influence of Alloy Composition and Exposure Conditions on the Selective Oxidation Behavior of Ni-Al Alloys. OXIDATION OF METALS, 88(3-4), 327-338.Springer Science and Business Media LLC. doi: 10.1007/s11085-017-9740-6.
Garcia-Fresnillo, L., Patel, R., Niewolak, L., Quadakkers, W.J., Hua, M., Wang, Q., & Meier, G.H. (2017). Oxidation behaviour and phase transformations of an interconnect material in simulated anode environment of intermediate temperature solid oxide fuel cells. MATERIALS AT HIGH TEMPERATURES, 34(1), 61-77.Informa UK Limited. doi: 10.1080/09603409.2016.1244373.
Lutz, B.S., Alvarado-Orozco, J.M., Garcia-Fresnillo, L., & Meier, G.H. (2017). Na2SO4-Deposit-Induced Corrosion of Mo-Containing Alloys. OXIDATION OF METALS, 88(5-6), 599-620.Springer Science and Business Media LLC. doi: 10.1007/s11085-017-9746-0.
Garcia-Herrera, J.E., Alvarado-Orozco, J.M., Munoz-Saldana, J., Garcia-Fresnillo, L., & Meier, G.H. (2015). The Effect of Different SO2/SO3 Catalytic Media on High-Temperature Corrosion Processes (Hot Corrosion, Fireside Corrosion, Sulfidation-Oxidation). OXIDATION OF METALS, 84(3-4), 233-240.Springer Science and Business Media LLC. doi: 10.1007/s11085-015-9586-8.
Gheno, T., Meier, G.H., & Gleeson, B. (2015). High Temperature Reaction of MCrAlY Coating Compositions with CaO Deposits. OXIDATION OF METALS, 84(1-2), 185-209.Springer Science and Business Media LLC. doi: 10.1007/s11085-015-9550-7.
Lutz, B.S., Holcomb, G.R., & Meier, G.H. (2015). Determination of the Initiation and Propagation Mechanism of Fireside Corrosion. OXIDATION OF METALS, 84(3-4), 353-381.Springer Science and Business Media LLC. doi: 10.1007/s11085-015-9559-y.
Niewolak, L., Garcia-Fresnillo, L., Meier, G.H., & Quadakkers, W.J. (2015). Sigma-phase formation in high chromium ferritic steels at 650 °C. JOURNAL OF ALLOYS AND COMPOUNDS, 638, 405-418.Elsevier BV. doi: 10.1016/j.jallcom.2015.03.076.
Schiek, M., Niewolak, L., Nowak, W., Meier, G.H., Vaßen, R., & Quadakkers, W.J. (2015). Scale Formation of Alloy 602 CA During Isothermal Oxidation at 800–1100 °C in Different Types of Water Vapor Containing Atmospheres. Oxidation of Metals, 84(5-6), 661-694.Springer Science and Business Media LLC. doi: 10.1007/s11085-015-9595-7.
Yanar, N.M., Lutz, B.S., Garcia-Fresnillo, L., Brady, M.P., & Meier, G.H. (2015). The Effects of Water Vapor on the Oxidation Behavior of Alumina Forming Austenitic Stainless Steels. Oxidation of Metals, 84(5-6), 541-565.Springer Science and Business Media LLC. doi: 10.1007/s11085-015-9581-0.
Huczkowski, P., Olszewski, T., Schiek, M., Lutz, B., Holcomb, G.R., Shemet, V., Nowak, W., Meier, G.H., Singheiser, L., & Quadakkers, W.J. (2014). Effect of SO2 on oxidation of metallic materials in CO2/H2O-rich gases relevant to oxyfuel environments. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 65(2), 121-131.Wiley. doi: 10.1002/maco.201307306.
Meier, G.H. (2014). Thermodynamics of Surfaces and Interfaces. 1-238.Cambridge University Press. doi: 10.1017/cbo9781139047029.
Jackson, R.W., Leonard, J.P., Niewolak, L., Quadakkers, W.J., Murray, R., Romani, S., Tatlock, G.J., Pettit, F.S., & Meier, G.H. (2013). Analysis of the Reactive Element Effect on the Oxidation of Ceria Doped Nickel (vol 78, pg 197, 2012). OXIDATION OF METALS, 80(5-6), 687-688.Springer Science and Business Media LLC. doi: 10.1007/s11085-013-9441-8.
Mu, N., Jung, K., Yanar, N.M., Pettit, F.S., Holcomb, G.R., Howard, B.H., & Meier, G. (2013). The Effects of Water Vapor and Hydrogen on the High-Temperature Oxidation of Alloys. Oxid. Metals, 79(461).
Mu, N., Jung, K., Yanar, N.M., Pettit, F.S., Holcomb, G.R., Howard, B.H., & Meier, G.H. (2013). The Effects of Water Vapor and Hydrogen on the High-Temperature Oxidation of Alloys. OXIDATION OF METALS, 79(5-6), 461-472.Springer Science and Business Media LLC. doi: 10.1007/s11085-012-9349-8.
Task, M.N., Gleeson, B., Pettit, F.S., & Meier, G. (2013). The Effect of Microstructure on the Type II Hot Corrosion of Ni-Base MCrAlY Alloys. Oxid. Metals, 80(125).
Task, M.N., Gleeson, B., Pettit, F.S., & Meier, G.H. (2013). The Effect of Microstructure on the Type II Hot Corrosion of Ni-Base MCrAlY Alloys. OXIDATION OF METALS, 80(1-2), 125-146.Springer Science and Business Media LLC. doi: 10.1007/s11085-013-9405-z.
Helminiak, M.A., Yanar, N.M., Pettit, F.S., Taylor, T.A., & Meier, G. (2012). The Effect of Superalloy Substrate on the Behaviour of High-purity Low-density Air Plasma Sprayed Thermal Barrier Coatings. Materials at High Temperatures, 29(264).
Helminiak, M.A., Yanar, N.M., Pettit, F.S., Taylor, T.A., & Meier, G. (2012). Factors Affecting the Microstructural Stability and Durability of Thermal Barrier Coatings Fabricated by Air Plasma Spraying. Materials and Corrosion, 63(929).
Helminiak, M.A., Yanar, N.M., Pettit, F.S., Taylor, T.A., & Meier, G.H. (2012). Factors affecting the microstructural stability and durability of thermal barrier coatings fabricated by air plasma spraying. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 63(10), 929-939.Wiley. doi: 10.1002/maco.201206646.
Helminiak, M.A., Yanar, N.M., Pettit, F.S., Taylor, T.A., & Meier, G.H. (2012). The effect of superalloy substrate on the behaviour of high-purity low-density air plasma sprayed thermal barrier coatings. MATERIALS AT HIGH TEMPERATURES, 29(3), 264-271.Informa UK Limited. doi: 10.3184/096034012X13335310236212.
Jackson, R.W., Leonard, J.P., Niewolak, L., Quadakkers, W.J., Murray, R., Romani, S., Tatlock, G.J., Pettit, F.S., & Meier, G. (2012). Analysis of the Reactive Element Effect on the Oxidation of Ceria Doped Nickel. Oxid. Metals, 78(197).
Jackson, R.W., Leonard, J.P., Niewolak, L., Quadakkers, W.J., Murray, R., Romani, S., Tatlock, G.J., Pettit, F.S., & Meier, G.H. (2012). Analysis of the Reactive Element Effect on the Oxidation of Ceria Doped Nickel. OXIDATION OF METALS, 78(3-4), 197-210.Springer Science and Business Media LLC. doi: 10.1007/s11085-012-9300-z.
Mu, N., Jung, K.Y., Yanar, N.M., Meier, G., Pettit, F.S., & Holcomb, G.R. (2012). Water Vapor Effects on the Oxidation Behavior of Fe-Cr and Ni-Cr Alloys in Atmospheres Relevant to Oxy-fuel Combustion. Oxid. Metals, 78(221).
Mu, N., Jung, K.Y., Yanar, N.M., Meier, G.H., Pettit, F.S., & Holcomb, G.R. (2012). Water Vapor Effects on the Oxidation Behavior of Fe-Cr and Ni-Cr Alloys in Atmospheres Relevant to Oxy-fuel Combustion. OXIDATION OF METALS, 78(3-4), 221-237.Springer Science and Business Media LLC. doi: 10.1007/s11085-012-9302-x.
Jung, K., Kim, C.S., Pettit, F.S., & Meier, G.H. (2011). Interfacial failure via encapsulation of external particulates in an outward-growing thermal oxide. JOURNAL OF POWER SOURCES, 196(10), 4686-4694.Elsevier BV. doi: 10.1016/j.jpowsour.2010.12.104.
Meier, G., Yanar, N.M., Helminiak, M., & Pettit, F.S. (2011). Comparison of the Failures During Cyclic Oxidation of YSZ Thermal Barrier Coatings Fabricated via EBPVD and APS. Metallurgical and Materials Trans. A, (42A), 905.
Task, M.N., Gleeson, B., Pettit, F.S., & Meier, G.H. (2011). Compositional effects on the Type I hot corrosion of β-NiAl alloys. SURFACE & COATINGS TECHNOLOGY, 206(7), 1552-1557.Elsevier BV. doi: 10.1016/j.surfcoat.2011.06.025.
Yanar, N.M., Helminiak, M., Meier, G.H., & Pettit, F.S. (2011). Comparison of the Failures during Cyclic Oxidation of Yttria-Stabilized (7 to 8 Weight Percent) Zirconia Thermal Barrier Coatings Fabricated via Electron Beam Physical Vapor Deposition and Air Plasma Spray. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(4), 905-921.Springer Science and Business Media LLC. doi: 10.1007/s11661-010-0436-7.
Zurek, J., Meier, G.H., Wessel, E., Singheiser, L., & Quadakkers, W.J. (2011). Temperature and gas composition dependence of internal oxidation kinetics of an Fe-10%Cr alloy in water vapour containing environments. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 62(6), 504-513.Wiley. doi: 10.1002/maco.201005865.
Abellán, J.P., Olszewski, T., Meier, G.H., Singheiser, L., & Quadakkers, W.J. (2010). The oxidation behaviour of the 9 % Cr steel P92in CO2- and H2O-rich gases relevant to oxyfuel environments. International Journal of Materials Research, 101(2), 287-299.Walter de Gruyter GmbH. doi: 10.3139/146.110271.
Meier, G.H., Jung, K., Mu, N., Yanar, N.M., Pettit, F.S., Abellan, J.P., Olszewski, T., Hierro, L.N., Quadakkers, W.J., & Holcomb, G.R. (2010). Effect of Alloy Composition and Exposure Conditions on the Selective Oxidation Behavior of Ferritic Fe-Cr and Fe-Cr-X Alloys. OXIDATION OF METALS, 74(5-6), 319-340.Springer Science and Business Media LLC. doi: 10.1007/s11085-010-9215-5.
Task, M.N., Kim, D.E., Liu, Z.K., Gleeson, B., Pettit, F.S., & Meier, G.H. (2010). Phase Stability and Oxidation Behavior of an Alumina Scale-Forming NiCrAlY Alloy. OXIDATION OF METALS, 74(3-4), 179-191.Springer Science and Business Media LLC. doi: 10.1007/s11085-010-9206-6.
Abellan, J.P., Olszewski, T., Penkalla, H.J., Meier, G.H., Singheiser, L., & Quadakkers, W.J. (2009). Scale formation mechanisms of martensitic steels in high CO2/H2O-containing gases simulating oxyfuel environments. MATERIALS AT HIGH TEMPERATURES, 26(1), 63-72.Informa UK Limited. doi: 10.3184/096034009X438185.
Helminiak, M.A., Yanar, N.M., Pettit, F.S., Taylor, T.A., & Meier, G.H. (2009). The behavior of high-purity, low-density air plasma sprayed thermal barrier coatings. SURFACE & COATINGS TECHNOLOGY, 204(6-7), 793-796.Elsevier BV. doi: 10.1016/j.surfcoat.2009.09.065.
Meier, G., Zhang, Z.T., Sohn, I.R., Pettit, F.S., & Sridhar, S. (2009). Investigation of the Effect of Alloying Elements and Water Vapor Contents on the Oxidation and Decarburization of TRIP Steels. Metallurgical and Materials Trans. B, (40), 567.
Subanovic, M., Naumenko, D., Kamruddin, M., Meier, G., Singheiser, L., & Quadakkers, W.J. (2009). Blistering of MCrAlY-coatings in H2/H2O-atmospheres. CORROSION SCIENCE, 51(3), 446-450.Elsevier BV. doi: 10.1016/j.corsci.2009.01.008.
Yanar, N.M., Meier, E.M., Pettit, F.S., & Meier, G.H. (2009). The effect of yttrium content on the oxidation-induced degradation of NiCoCrAlY coatings and the influence of surface roughness on the oxidation of NiCoCrAlY and platinum aluminide coatings. MATERIALS AT HIGH TEMPERATURES, 26(3), 331-338.Informa UK Limited. doi: 10.3184/096034009X472231.
Zhang, Z.T., Sohn, I.R., Pettit, F.S., Meier, G.H., & Sridhar, S. (2009). Effect of Alloying Elements, Water Vapor Content, and Temperature on the Oxidation of Interstitial-Free Steels. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 40(4), 550-566.Springer Science and Business Media LLC. doi: 10.1007/s11663-009-9238-y.
Zhang, Z.T., Sohn, I.R., Pettit, F.S., Meier, G.H., & Sridhar, S. (2009). Investigation of the Effect of Alloying Elements and Water Vapor Contents on the Oxidation and Decarburization of Transformation-Induced Plasticity Steels. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 40(4), 567-584.Springer Science and Business Media LLC. doi: 10.1007/s11663-009-9255-x.
Zurek, J., Meier, G.H., Essuman, E., Haensel, M., Singheiser, L., & Quadakkers, W.J. (2009). Effect of specimen thickness on the growth rate of chromia scales on Ni-base alloys in high- and low-pO2 gases. JOURNAL OF ALLOYS AND COMPOUNDS, 467(1-2), 450-458.Elsevier BV. doi: 10.1016/j.jallcom.2007.12.015.
Essuman, E., Meier, G.H., Zurek, J., Haensel, M., & Quadakkers, W.J. (2008). The effect of water vapor on selective oxidation of Fe-Cr alloys. OXIDATION OF METALS, 69(3-4), 143-162.Springer Science and Business Media LLC. doi: 10.1007/s11085-007-9090-x.
Essuman, E., Meier, G.H., Zurek, J., Haensel, M., Norby, T., Singheiser, L., & Quadakkers, W.J. (2008). Protective and non-protective scale formation of NiCr alloys in water vapour containing high- and low-pO2 gases. CORROSION SCIENCE, 50(6), 1753-1760.Elsevier BV. doi: 10.1016/j.corsci.2008.03.001.
Essuman, E., Meier, G.H., Zurek, J., Haensel, M., Singheiser, L., Norby, T., & Quadakkers, W.J. (2008). Effect of oxygen partial pressure on the oxidation behaviour of an yttria dispersion strengthened NiCr-base alloy. JOURNAL OF MATERIALS SCIENCE, 43(16), 5591-5598.Springer Science and Business Media LLC. doi: 10.1007/s10853-008-2795-7.
Essuman, E., Meier, G.H., Zurek, J., Hänsel, M., Singheiser, L., & Quadakkers, W.J. (2008). Enhanced Internal Oxidation as Reason for Breakdown of Protective Chromia Scales on FeCr-Alloys in Water Vapour Containing Gases. Materials Science Forum, 595-598(595-598), 699-706.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/msf.595-598.699.
Froitzheim, J., Meier, G.H., Niewolak, L., Ennis, P., Hattendorf, H., Singheiser, L., & Quadakkers, W.J. (2008). Development of high strength ferritic steel for interconnect application in SOFCs. JOURNAL OF POWER SOURCES, 178(1), 163-173.Elsevier BV. doi: 10.1016/j.jpowsour.2007.12.028.
Jackson, E.M.M., Yanar, N.M., Maris-Jakubowski, M.C., Onal-Hance, K., Meier, G.H., & Pettit, F.S. (2008). Effect of surface preparation on the durability of NiCoCrAlY coatings for oxidation protection and bond coats for thermal barrier coatings. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 59(6), 494-500.Wiley. doi: 10.1002/maco.200804133.
Jackson, R.W., Leonard, J.P., Niewolak, L., Quadakkers, W.J., Pettit, F.S., & Meier, G.H. (2008). The Effect of Copper and Ceria Additions on the High Temperature Oxidation of Nickel. Materials Science Forum, 595-598(595-598), 1057-1064.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/msf.595-598.1057.
Jackson, R.W., Leonard, J.P., Pettit, F.S., & Meier, G.H. (2008). The effect of minor elements on the growth and electrical properties of NiO on Ni. SOLID STATE IONICS, 179(37), 2111-2120.Elsevier BV. doi: 10.1016/j.ssi.2008.07.011.
Jackson, R.W., Pettit, F.S., & Meier, G.H. (2008). The behavior of nickel and silver in a simulated solid oxide fuel cell environment. JOURNAL OF POWER SOURCES, 185(2), 1030-1039.Elsevier BV. doi: 10.1016/j.jpowsour.2008.08.056.
Keeyoung, J., Pettit, F.S., & Meier, G.H. (2008). The effect of Ca-rich deposits on the high temperature degradation of coated and uncoated superalloys. Materials Science Forum, 595-598 PART 2(595-598), 805-812.
Meier, G., Meier Jackson, E.M., Yanar, N.M., Maris-Jakubowski, M.C., Onal-Hance, K., & Pettit, F.S. (2008). Effect of Surface Preparation on the Durability of NiCoCrAlY Coatings for Oxidation Protection and Bond Coats for Thermal Barrier Coatings. Materials and Corrosion, (59), 1.
Nychka, J.A., Clarke, D.R., & Meier, G.H. (2008). Spallation and transient oxide growth on PWA 1484 superalloy. Materials Science and Engineering: A, 490(1-2), 359-368.Elsevier BV. doi: 10.1016/j.msea.2008.01.043.
Quadakkers, W.J., Huczkowski, P., Naumenko, D., Zurek, J., Meier, G.H., Niewolak, L., & Singheiser, L. (2008). Why the Growth Rates of Alumina and Chromia Scales on Thin Specimens Differ from those on Thick Specimens. Materials Science Forum, 595-598(595-598), 1111-1118.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/msf.595-598.1111.
Essuman, E., Meier, G.H., Zurek, J., Haensel, M., Singheiser, L., & Quadakkers, W.J. (2007). Enhanced internal oxidation as trigger for breakaway oxidation of Fe-Cr alloys in gases containing water vapor. SCRIPTA MATERIALIA, 57(9), 845-848.Elsevier BV. doi: 10.1016/j.scriptamat.2007.06.058.
Hammer, J.E., Laney, S.J., Jackson, R.W., Coyne, K., Pettit, F.S., & Meier, G.H. (2007). The oxidation of ferritic stainless steels in simulated solid-oxide fuel-cell atmospheres. OXIDATION OF METALS, 67(1-2), 1-38.Springer Science and Business Media LLC. doi: 10.1007/s11085-006-9041-y.
Stiger, M.J., Yanar, N.M., Jackson, R.W., Laney, S.J., Pettit, F.S., Meier, G.H., Gandhi, A.S., & Levi, C.G. (2007). Development of intermixed zones of alumina/Zirconia in thermal barrier coating systems. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 38A(4), 848-857.Springer Science and Business Media LLC. doi: 10.1007/s11661-007-9117-6.
Birks, N., Meier, G.H., & Pettit, F.S. (2006). Introduction to the High Temperature Oxidation of Metals. 9780521480420, 1-338.Cambridge University Press. doi: 10.1017/cbo9781139163903.
Ma, Q., Beuth, J.L., Pettit, F.S., Stiger, M.J., & Meier, G. (2006). Indentation of a Multi-Layered Solid Cylinder for the Measurement of Thermal Barrier Coating Adhesion. Materials Science And Technology -Association For Iron And Steel Technology, (6), 535.
Meier, G., Stiger, M.J., Pettit, F.S., Ma, Q., Beuth, J.L., & ce, M.J. (2006). Accelerated Cyclic Oxidation Testing Protocols for Thermal Barrier Coatings and Alumina-forming Alloys and Coatings. Materials and Corrosion, (57), 1.
Stiger, M.J., Meier, G.H., Pettit, F.S., Ma, Q., Beuth, J.L., & Lance, M.J. (2006). Accelerated cyclic oxidation testing protocols for thermal barrier coatings and alumina-forming alloys and coatings. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 57(1), 73-85.Wiley. doi: 10.1002/maco.200503896.
Yanar, N.M., Pettit, F.S., & Meier, G.H. (2006). Failure characteristics during cyclic oxidation of yttria stabilized zirconia thermal barrier coatings deposited via electron beam physical vapor deposition on platinum aluminide and on NiCoCrAlY bond coats with processing modifications for improved performances. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(5), 1563-1580.Springer Science and Business Media LLC. doi: 10.1007/s11661-006-0100-4.
Yanar, N.M., Pettit, F.S., & Meier, G.H. (2006). Failure characteristics during cyclic oxidation of Yttria stabilized zirconia thermal barrier coatings deposited via electron beam physical vapor deposition on platinum aluminide and on NiCoCrAlY bond coats with processing modifications for improved performances. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 37(5), 1563-1580. doi: 10.1007/s11661-006-0100-4.
Helmick, D.A., Meier, G.H., & Pettit, F.S. (2005). The development of protective borosilicate layers on a Mo-3Si-1B (weight percent) alloy. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 36A(12), 3371-3383.Springer Science and Business Media LLC. doi: 10.1007/s11661-005-0011-9.
Helmick, D.A., Meier, G.H., & Pettit, F.S. (2005). High temperature oxidation behavior of a Mo-3Si-1B(wt%) alloy. MATERIALS AT HIGH TEMPERATURES, 22(3-4), 293-307.Maney Publishing. doi: 10.3184/096034005782744281.
Helmick, D.A., Meier, G.H., & Pettit, F.S. (2005). The development of protective borosilicate layers on a Mo-3Si-1 B (weight percent) alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36(12), 3371-3383. doi: 10.1007/s11661-005-0011-9.
Ma, Q., Beuth, J., Pettit, F., Meier, G., & Stiger, M. (2005). Use of indentation fracture tests to investigate toughness loss mechanisms in thermal barrier coating systems. Materials Science and Technology, 1(1), 3-6.
Onal, K., Maris-Sida, M.C., Meier, G.H., & Pettit, F.S. (2004). The effects of water vapor on the oxidation of nickel-base superalloys and V coatings at temperatures from 700°C to 1100°C. (pp. 607-615).TMS.
Blachère, J.R., Schumann, E., Meier, G.H., & Pettit, F.S. (2003). Textures of alumina scales on FeCrAl alloys. SCRIPTA MATERIALIA, 49(9), 909-912.Elsevier BV. doi: 10.1016/S1359-6462(03)00403-2.
Maris-Sida, M.C., Meier, G.H., & Pettit, F.S. (2003). Some water vapor effects during the oxidation of alloys that are α-Al2O3 formers. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 34A(11), 2609-2619.Springer Science and Business Media LLC. doi: 10.1007/s11661-003-0020-5.
Maris-Sida, M.C., Meier, G.H., & Pettit, F.S. (2003). Some water vapor effects during the oxidation of alloys that are α-Al
Onal, K., Maris-Sida, M.C., Meier, G.H., & Pettit, F.S. (2003). Water vapor effects on the cyclic oxidation resistance of alumina forming alloys. MATERIALS AT HIGH TEMPERATURES, 20(3), 327-337.Informa UK Limited. doi: 10.3184/096034003782748757.
Yanar, N.M., Kim, G., Hamano, S., Pettit, F.S., & Meier, G.H. (2003). Microstructural characterization of the failures of thermal barrier coatings on Ni-base superalloys. MATERIALS AT HIGH TEMPERATURES, 20(4), 495-506.Informa UK Limited. doi: 10.3184/096034003782750088.
Yanar, N.M., Pettit, F.S., & Meier, G.H. (2003). Effects of bond coat processing on the durability of thermal barrier coatings. THERMEC'2003, PTS 1-5, 426-4(3), 2453-2458.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/MSF.426-432.2453.
Kim, G.M., Yanar, N.M., Hewitt, E.N., Pettit, F.S., & Meier, G.H. (2002). The effect of the type of thermal exposure on the durability of thermal barrier coatings. SCRIPTA MATERIALIA, 46(7), 489-495.Elsevier BV. doi: 10.1016/S1359-6462(02)00016-7.
Warnes, B.M., Pettit, F.S., & Meier, G.H. (2002). Hot-corrosion resistance of Ni-Cr-Al-Y and Ni-18% Si alloys in sulfate eutectic and sulfate plus vanadate melts at 973 K. OXIDATION OF METALS, 58(5-6), 487-498.Springer Science and Business Media LLC. doi: 10.1023/A:1020521022148.
Yanar, N.M., Meier, G.H., & Pettit, F.S. (2002). The influence of platinum on the failure of EBPVD YSZ TBCs on NiCoCrAlY bond coats. SCRIPTA MATERIALIA, 46(4), 325-330.Elsevier BV. doi: 10.1016/S1359-6462(01)01222-2.
Evans, A.G., Mumm, D.R., Hutchinson, J.W., Meier, G.H., & Pettit, F.S. (2001). Mechanisms controlling the durability of thermal barrier coatings. PROGRESS IN MATERIALS SCIENCE, 46(5), 505-553.Elsevier BV. doi: 10.1016/S0079-6425(00)00020-7.
Handoko, R.A., Beuth, J.L., Meier, G.H., Pettit, F.S., & Stiger, M.J. (2001). Mechanisms for interfacial toughness loss in thermal barrier coating systems. DURABLE SURFACES, 197(197), 165-183.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/KEM.197.165.
Kubena, K.A., Meier, G.H., & Pettit, F.S. (2001). Comparison of environmental sulfur effects on the oxidation resistance of nickel base superalloys with low sulfur contents and with a reactive element. (pp. 157-163).ASM International.
Sommer, E., Terry, S.G., Sigle, W., Mennicke, C., Gemming, T., Meier, G.H., Levi, C.G., & Rühle, M. (2001). Metallic Precipitate Formation during Alumina Growth in a FeCrAl-Based Thermal Barrier Coating Model System. Materials Science Forum, 369-372(II), 671-678.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/msf.369-372.671.
Yanar, N.M., Stiger, M.J., Maris-Sida, M., Pettit, F.S., & Meier, G.H. (2001). The effects of high temperature exposure on the durability of thermal barrier coatings. DURABLE SURFACES, 197(197), 145-163.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/KEM.197.145.
Meier, G., Sarioglu, C., Stiger, M.J., Blachere, J.R., Janakiraman, R., Schuman, E., Ashary, A., & Pettit, F.S. (2000). The Adhesion of Alumina Films to Metallic Alloys and Coatings. Materials and Corrosion, (51), 1.
Sarioglu, C., Schumann, E., Blachere, J.R., Pettit, F.S., & Meier, G.H. (2000). X-ray determination of stresses in alumina scales on high temperature alloys. MATERIALS AT HIGH TEMPERATURES, 17(1), 109-115.Informa UK Limited. doi: 10.1179/mht.2000.017.
Sarioglu, C., Stiger, M.J., Blachere, J.R., Janakiraman, R., Schumann, E., Ashary, A., Pettit, F.S., & Meier, G.H. (2000). The adhesion of alumina films to metallic alloys and coatings. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 51(5), 358-372.Wiley. doi: 10.1002/(sici)1521-4176(200005)51:5<358::aid-maco358>3.0.co;2-c.
Schumann, E., Sarioglu, C., Blachere, J.R., Pettit, F.S., & Meier, G.H. (2000). High-temperature stress measurements during the oxidation of NiAl. OXIDATION OF METALS, 53(3-4), 259-272.Springer Science and Business Media LLC. doi: 10.1023/A:1004585003083.
Schumann, E., Sarioglu, C., Blachere, J.R., Pettit, F.S., & Meier, G.H. (2000). High-temperature stress measurements during the oxidation of NiAl. Oxidation of Metals, 53(3), 259-272. doi: 10.1023/a:1004585003083.
Meier, G., Janakiraman, R., & Pettit, F.S. (1999). The Effect of Water Vapor on the Oxidation of Alloys that Develop Alumina Scales for Protection. Metall. and Mater. Tran. A, (30A), 2905.
Stiger, M.J., Yanar, N.M., Topping, M.G., Pettit, F.S., & Meier, G.H. (1999). Thermal barrier coatings for the 21st century. ZEITSCHRIFT FUR METALLKUNDE, 90(12), 1069-1078.
Dettenwanger, F., Schumann, E., Ruhle, M., Rakowski, J., & Meier, G.H. (1998). Microstructural study of oxidized γ-TiAl. Oxidation of Metals, 50(3/4), 269-307.Springer Science and Business Media LLC. doi: 10.1023/a:1018892422121.
Dettenwanger, E., Schumann, E., Rakowski, J., Meier, G.H., & Rühle, M. (1997). Development and Microstructure of the Al‐Depleted Layer of Oxidized TiAl. In Oxidation of Intermetallics. (pp. 265-273).Wiley. doi: 10.1002/9783527612413.ch18.
Dettenwanger, F., Schumann, E., Rakowski, J., Meier, G.H., & Rühle, M. (1997). Development and microstructure of the Al‐depleted layer of oxidized TiAl. Materials and Corrosion, 48(1), 23-27.Wiley. doi: 10.1002/maco.19970480105.
Dettenwanger, F., Schumann, E., Rakowski, J., Meier, G.H., & Rühle, M. (1997). TEM Investigations Concerning the Effect of Nitrogen on the Oxidation of TiAl. Materials Science Forum, 251-254(251-254), 211-218.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/msf.251-254.211.
Meier, G.H. (1997). Research on Oxidation and Embrittlement of Intermetallic Compounds in the U.S. In Oxidation of Intermetallics. (pp. 15-58).Wiley. doi: 10.1002/9783527612413.ch02.
Sarioglu, S., Blachere, J.R., Pettit, F.S., Meier, G.H., Smialek, J.L., & Mennicke, C. (1997). The effects of reactive element additions, sulfur removal, and specimen thickness on the oxidation behaviour of alumina-forming Ni- and Fe-base alloys. HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 4, PTS 1 AND 2, 251-2(251-254), 405-412.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/MSF.251-254.405.
Meier, G.H. (1996). Research on oxidation and embrittlement of Intermetallic Compounds in the U.S. Materials and Corrosion, 47(11), 595-618.Wiley. doi: 10.1002/maco.19960471104.
Pettit, F.S., & Meier, G.H. (1996). Hot corrosion of metallic alloys and ceramics. ANALES DE LA ASOCIACION QUIMICA ARGENTINA, 84(2), 117-124.
Rakowski, J.M., Meier, G.H., Pettit, F.S., Dettenwanger, F., Schumann, E., & Ruhle, M. (1996). The effect of surface preparation on the oxidation behavior of gamma TiAl-base intermetallic alloys. SCRIPTA MATERIALIA, 35(12), 1417-1422.Elsevier BV. doi: 10.1016/S1359-6462(96)00315-6.
Berztiss, D.A., Pettit, F.S., & Meier, G.H. (1995). Anomalous oxidation of intermetallics. 364, (pp. 1285-1290).MRS.
Dettenwanger, F., Schumann, E., Ruehle, M., Rakowski, J., & Meier, G.H. (1995). Effect of nitrogen on the oxidation of TiAl. 364, (pp. 981-986).MRS.
Grabke, H.J., & Meier, G.H. (1995). Accelerated oxidation, internal oxidation, intergranular oxidation, and pesting of intermetallic compounds. Oxidation of Metals, 44(1-2), 147-176.Springer Science and Business Media LLC. doi: 10.1007/bf01046726.
MEIER, G.H., PETTIT, F.S., & SMIALEK, J.L. (1995). THE EFFECTS OF REACTIVE ELEMENT ADDITIONS AND SULFUR REMOVAL ON THE ADHERENCE OF ALUMINA TO NI-BASE AND FE-BASE ALLOYS. WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 46(4), 232-240.Wiley. doi: 10.1002/maco.19950460407.
RAKOWSKI, J.M., PETTIT, F.S., MEIER, G.H., DETTENWANGER, F., SCHUMANN, E., & RUHLE, M. (1995). THE EFFECT OF NITROGEN ON THE OXIDATION OF GAMMA-TIAL. SCRIPTA METALLURGICA ET MATERIALIA, 33(6), 997-1003.Elsevier BV. doi: 10.1016/0956-716X(95)00312-J.
BIRKS, N., MEIER, G.H., & PETTIT, F.S. (1994). FORMING CONTINUOUS ALUMINA SCALES TO PROTECT SUPERALLOYS. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 46(12), 42-46.Springer Science and Business Media LLC. doi: 10.1007/BF03222664.
Meier, G., Pettit, F.S., & Birks, N. (1994). Protective Alumina Scales for Oxidation Resistance. JOM, (46), 42.
STASIK, M.C., PETTIT, F.S., MEIER, G.H., ASHARY, A., & SMIALEK, J.L. (1994). EFFECTS OF REACTIVE ELEMENT ADDITIONS AND SULFUR REMOVAL ON THE OXIDATION BEHAVIOR OF FECRAL ALLOYS. SCRIPTA METALLURGICA ET MATERIALIA, 31(12), 1645-1650.Elsevier BV. doi: 10.1016/0956-716X(94)90457-X.
Meier, G.H., Birks, N., Pettit, F.S., Perkins, R.A., & Grabke, H.J. (1993). Environmental behavior of intermetallic materials. (pp. 861-877).TMS.
MEIER, G.H., PETTIT, F.S., & HU, S. (1993). OXIDATION BEHAVIOR OF TITANIUM ALUMINIDES. JOURNAL DE PHYSIQUE IV, 3(C9), 395-402.EDP Sciences. doi: 10.1051/jp4:1993941.
Berztiss, D.A., Cerchiara, R.R., Gulbransen, E.A., Pettit, F.S., & Meier, G.H. (1992). Oxidation of MoSi "SUB 2" and comparison with other silicide materials.
BERZTISS, D.A., CERCHIARA, R.R., GULBRANSEN, E.A., PETTIT, F.S., & MEIER, G.H. (1992). OXIDATION OF MOSI2 AND COMPARISON WITH OTHER SILICIDE MATERIALS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 155(1-2), 165-181.Elsevier BV. doi: 10.1016/0921-5093(92)90324-T.
BIRKS, N., MEIER, G.H., & PETTIT, R.S. (1992). Practical Complications in the High Temperature Attack of Metals. Mineral Processing and Extractive Metallurgy Review, 10(1), 177-191.Informa UK Limited. doi: 10.1080/08827509208914084.
Meier, G.H., & Pettit, F.S. (1992). The oxidation behavior of intermetallic compounds. Materials Science and Engineering A, 153(1-2), 548-560. doi: 10.1016/0921-5093(92)90250-5.
Meier, G.H., & Pettit, F.S. (1992). The oxidation behavior of intermetallic compounds. 153(1-2), 548-560.
MEIER, G.H., & PETTIT, F.S. (1992). HIGH-TEMPERATURE OXIDATION AND CORROSION OF INTERMETALLIC COMPOUNDS. MATERIALS SCIENCE AND TECHNOLOGY, 8(4), 331-338.SAGE Publications. doi: 10.1179/mst.1992.8.4.331.
MEIER, G.H., & PETTIT, F.S. (1992). THE OXIDATION BEHAVIOR OF INTERMETALLIC COMPOUNDS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 153(1-2), 548-560.Elsevier BV. doi: 10.1016/0921-5093(92)90250-5.
Perkins, R.A., & Meier, G.H. (1990). The oxidation behavior and protection of niobium. JOM, 42(8), 17-21.Springer Science and Business Media LLC. doi: 10.1007/bf03221046.
Meier, G.H. (1989). A review of advances in high-temperature corrosion. Materials Science and Engineering: A, 120-121(PART 1), 1-11.Elsevier BV. doi: 10.1016/0921-5093(89)90712-0.
MEIER, G.H., & PETTIT, F.S. (1989). HIGH-TEMPERATURE CORROSION OF ALUMINA-FORMING COATINGS FOR SUPERALLOYS. SURFACE & COATINGS TECHNOLOGY, 39(1-3), 1-17.Elsevier BV. doi: 10.1016/0257-8972(89)90036-4.
MEIER, G.H., CHENG, C., PERKINS, R.A., & BAKKER, W. (1989). DIFFUSION CHROMIZING OF FERROUS-ALLOYS. SURFACE & COATINGS TECHNOLOGY, 39(1-3), 53-64.Elsevier BV. doi: 10.1016/0257-8972(89)90040-6.
Meier, G., Perkins, R.A., & Chiang, K.T. (1988). Formation of Alumina on Nb Al Alloys. Scripta Met, (22), 419.
Perkins, R.A., Chiang, K.T., & Meier, G.H. (1988). Formation of alumina on NbAl alloys. Scripta Metallurgica, 22(3), 419-424.Elsevier BV. doi: 10.1016/s0036-9748(88)80217-5.
Adachi, T., & Meier, G.H. (1987). Oxidation of iron-silicon alloys. Oxidation of Metals, 27(5-6), 347-366.Springer Science and Business Media LLC. doi: 10.1007/bf00659276.
BIRKS, N., MEIER, G.H., & PETTIT, F.S. (1987). HIGH-TEMPERATURE CORROSION-RESISTANCE. JOURNAL OF METALS, 39(12), 28-31.Springer Science and Business Media LLC. doi: 10.1007/BF03257568.
Perkins, R.A., Chiang, K.T., & Meier, G.H. (1987). Formation of alumina on TiAl alloys. Scripta Metallurgica, 21(11), 1505-1510.Elsevier BV. doi: 10.1016/0036-9748(87)90291-2.
CAOLA, J.R., MEIER, G.H., & PETTIT, F.S. (1986). TRANSMISSION ELECTRON-MICROSCOPY CHARACTERIZATION OF THE MICROSTRUCTURE OF A COCRALY ELECTRON-BEAM PHYSICAL VAPOR-DEPOSITION COATING ON IN738. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 4(6), 2915-2921.American Vacuum Society. doi: 10.1116/1.573660.
Hwang, S.Y., Meier, G.H., & Pettit, F.S. (1986). CONCERNING THE INITIATION OF HOT CORROSION ATTACK. 86-9, (pp. 330-345).The Electrochem. Soc.
Srinivasan, V., Meier, G.H., McCormick, A.W., & Rai, A.K. (1986). Ion implantation and thermal oxidation. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 16(2-3), 293-300.Elsevier BV. doi: 10.1016/0168-583x(86)90026-1.
Meier, G.H., & Pettit, F.S. (1985). SULFIDATION AND HOT CORROSION OF ALLOYS AT ELEVATED TEMPERATURES. (pp. 161-175).AIME.
Pfeiffer, W., Riegelbauer, G., Meier, G., & Scheibler, B. (1985). Effect of hypoxanthine-3(N)-oxide and hypoxanthine-1(N)-oxide on central nervous excitation of the black tetraGymnocorymbus ternetzi (Characidae, Ostariophysi, Pisces) indicated by dorsal light response. Journal of Chemical Ecology, 11(4), 507-523.Springer Science and Business Media LLC. doi: 10.1007/bf00989562.
Chiang, K.T., Meier, G.H., & Perkins, R.A. (1984). The effects of deposits of CaO, CaSO4, and MgO on the oxidation of several Cr2O3-forming and Al2O3-forming alloys. Journal of Materials for Energy Systems, 6(2), 71-86.Springer Science and Business Media LLC. doi: 10.1007/bf02833417.
ACRIVOS, C., PETTIT, F.S., & MEIER, G.H. (1983). HIGH-TEMPERATURE OXIDATION OF NI-SI ALLOYS. 130, (p. C335).
Ashary, A., Meier, G.H., & Pettit, F.S. (1983). ACOUSTIC EMISSION STUDY OF OXIDE CRACKING DURING ALLOY OXIDATION. (pp. 105-119).AIME.
Chiang, K.T., Pettit, F.S., & Meier, G.H. (1983). LOW TEMPERATURE HOT CORROSION. (pp. 519-530).NACE.
Hwang, S.Y., Meier, G.H., Pettit, F.S., Johnston, G.R., Provenzano, V., & Smidt, F.A. (1983). INITIAL STAGES OF HOT CORROSION ATTACK OF CoCrAlY ALLOYS AT 700 degree C. (pp. 121-134).AIME.
Meier, G.H., Birks, N., Pettit, F.S., & Giggins, C.S. (1983). THERMODYNAMIC ANALYSES OF THE HIGH TEMPERATURE CORROSION ON ALLOYS IN GASES CONTAINING MORE THAN ONE REACTANT. (pp. 327-335).NACE.
Sprague, J.A., Johnston, G.R., Smidt, F.A., Hwang, S.Y., Meier, G.H., & Pettit, F.S. (1983). OXIDATION OF CoCrAlY AND Y-IMPLANTED CoCrAl ALLOYS. (pp. 93-103).AIME.
Ecer, G.M., Singh, R.B., & Meier, G.H. (1982). The influence of superficially applied oxide powders on the high-temperature oxidation behavior of Cr2O3-forming alloys. Oxidation of Metals, 18(1-2), 55-81.Springer Science and Business Media LLC. doi: 10.1007/bf00656095.
Meier, G., Ecer, G.M., & Singh, R.B. (1982). The Influence of Superficially Applied Oxide Powders in the High Temperature Oxidation Behavior of Cr2O3 forming Alloys. Oxid. Met, (18), 53.
Meier, G., Perkins, R.A., & Coons, W.C. (1982). The Reaction of Fe Cr, Ni Cr, and Co Cr Alloys and Carburizing/Oxidizing Gases. Oxid. Met, (17), 235.
Meier, G.H., Coons, W.C., & Perkins, R.A. (1982). Corrosion of iron-, nickel-, and cobalt-base alloys in atmospheres containing carbon and oxygen. Oxidation of Metals, 17(3-4), 235-262.Springer Science and Business Media LLC. doi: 10.1007/bf00738385.
Ecer, G.M., & Meier, G.H. (1979). Oxidation of high-chromium Ni-Cr alloys. Oxidation of Metals, 13(2), 119-158.Springer Science and Business Media LLC. doi: 10.1007/bf00611976.
Ecer, G.M., & Meier, G.H. (1979). The effect of cerium on the oxidation of Ni-50Cr alloys. Oxidation of Metals, 13(2), 159-180.Springer Science and Business Media LLC. doi: 10.1007/bf00611977.
HUANG, T., GULBRANSEN, E.A., & MEIER, G.H. (1979). HOT CORROSION OF NI-BASE TURBINE ALLOYS IN ATMOSPHERES IN COAL-CONVERSION SYSTEMS. JOURNAL OF METALS, 31(3), 28-35.Springer Science and Business Media LLC. doi: 10.1007/BF03354466.
Meier, G.H. (1979). THERMODYNAMICS OF HIGH TEMPERATURE CORROSION. Annual Conference on Materials for Coal Conversion and Utilization (Proceedings).
CHOU, A., DATTA, A., MEIER, G.H., & SOFFA, W.A. (1978). MICROSTRUCTURAL BEHAVIOR AND MECHANICAL HARDENING IN A CU-NI-CR ALLOY. JOURNAL OF MATERIALS SCIENCE, 13(3), 541-552.Springer Science and Business Media LLC. doi: 10.1007/BF00541804.
Meier, G.H., & Stoehr, R.A. (1978). HOT CORROSIVITY OF COAL GASIFICATION PRODUCTS ON GAS TURBINE ALLOYS.
Ecer, G.M., & Meier, G.H. (1976). OXIDATION OF HIGH-CHROMIUM BINARY Ni-Cr ALLOYS AND TERNARY ALLOYS CONTAINING Ce, Zr, AND Ti. (pp. 279-310).The Electrochemical Society.
Megusar, J., & Meier, G.H. (1976). Internal oxidation of dilute Co-Ti alloys. Metallurgical Transactions A, 7(8), 1133-1140.Springer Science and Business Media LLC. doi: 10.1007/bf02656595.
(1975). Internal Oxidation of Dilute Cu Ti Alloys. Met. Trans, (6A), 1973.
Wood, S., Adamonis, D., Guha, A., Soffa, W.A., & Meier, G.H. (1975). Internal oxidation of dilute Cu-Ti alloys. Metallurgical Transactions A, 6(9), 1793-1800.Springer Science and Business Media LLC. doi: 10.1007/bf02642309.
Bryant, W.A., & Meier, G.H. (1974). Factors affecting the adherence of chemically vapor-deposited coatings. Journal of Vacuum Science and Technology, 11(4), 719-724.American Vacuum Society. doi: 10.1116/1.1312742.
Bryant, W.A., & Meier, G.H. (1973). Kinetics of the Chemical Vapor Deposition of Tungsten. Journal of The Electrochemical Society, 120(4), 559-565.The Electrochemical Society. doi: 10.1149/1.2403500.
Ecer, G.M., & Meier, G.H. (1973). The effect of Cr2O3 volatilization on the oxidation kinetics of a NiCr alloy. Scripta Metallurgica, 7(11), 1189-1194.Elsevier BV. doi: 10.1016/0036-9748(73)90245-7.
Meier, G.H., & Rapp, R.A. (1971). Electrical Conductivities and Defect Structures of Pure NiO and Chromium-Doped NiO. Zeitschrift für Physikalische Chemie, 74(3_6), 168-189.Walter de Gruyter GmbH. doi: 10.1524/zpch.1971.74.3_6.168.
Lutz, B.S., Yanar, N.M., Holcomb, G.R., & Meier, G.H. (2017). Fireside Corrosion of Alumina-Forming Austenitic (AFA) Stainless Steels. In OXIDATION OF METALS, 87(3-4), (pp. 575-602).Springer Science and Business Media LLC. doi: 10.1007/s11085-016-9687-z.
Lutz, B.S., Holcomb, G.R., & Meier, G.H. (2014). Determination of the initiation and propagation mechanism of fireside corrosion. In Materials Science and Technology Conference and Exhibition 2014, MS and T 2014, 2, (pp. 1221-1229).
Holcomb, G.R., Tylczak, J., Meier, G.H., Lutz, B.S., Jung, K., Mu, N., Yanar, N.M., Pettit, F.S., Zhu, J., Wise, A., Laughlin, D.E., & Sridhar, S. (2013). Fireside Corrosion in Oxy-fuel Combustion of Coal. In OXIDATION OF METALS, 80(5-6), (pp. 599-610).Springer Science and Business Media LLC. doi: 10.1007/s11085-013-9399-6.
Task, M.N., Gleeson, B., Pettit, F.S., & Meier, G.H. (2013). Compositional Factors Affecting Protective Alumina Formation Under Type II Hot Corrosion Conditions. In OXIDATION OF METALS, 80(5-6), (pp. 541-552).Springer Science and Business Media LLC. doi: 10.1007/s11085-013-9410-2.
Holcomb, G.R., Tylczak, J., Meier, G.H., Jung, K.Y., Mu, N., Yanar, N., & Pettit, F. (2012). Fireside Corrosion in Oxy-Fuel Combustion of Coal. In ECS Transactions, 41(42), (pp. 73-84).The Electrochemical Society. doi: 10.1149/1.4718001.
Ma, Q., Beuth, J.L., Meier, G.H., & Pettit, F.S. (2009). Interfacial Fracture Analysis in EB-PVD/PTAL TBC Systems. In Volume 14: Processing and Engineering Applications of Novel Materials, 14, (pp. 341-350).ASMEDC. doi: 10.1115/imece2009-11706.
Alvin, M.A., Pettit, F., Meier, G., Yanar, N., Chyu, M., Mazzotta, D., Slaughter, W., Karaivanov, V., Kang, B., Feng, C., Chen, R., & Fu, T.C. (2008). Materials and component development for advanced turbine systems. In Advances in Materials Technology for Fossil Power Plants - Proceedings from the 5th International Conference, (pp. 413-423). doi: 10.1361/cp2007epri0413.
Ma, Q., Beuth, J.L., Meier, G.H., & Pettit, F.S. (2007). The effect of conical indenter shape on tbc interfacial toughness measurements. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3, (pp. 329-338). doi: 10.1115/IMECE200743816.
Ma, Q., Beuth, J.L., Meier, G.H., & Pettit, F.S. (2007). The Effect of Conical Indenter Shape on TBC Interfacial Toughness Measurements. In Volume 3: Design and Manufacturing, 3, (pp. 329-338).ASMEDC. doi: 10.1115/imece2007-43816.
Ma, Q., Beuth, J.L., Meier, G.H., & Pettit, F.S. (2007). Indenter shape effects on interface adhesion measurement in thermal barrier coating systems. In Materials Science and Technology Conference and Exhibition, MS and T'07 - "Exploring Structure, Processing, and Applications Across Multiple Materials Systems", 3, (pp. 2040-2050).
Dhanaraj, N., Beuth, J., Meier, G., Pettit, F., Hammer, J., & Laney, S. (2005). Interfacial fracture testing to evaluate the durability of SOFC interconnect alloys. In Materials Science and Technology, 3, (pp. 165-175).
Janakiraman, R., Meier, G.H., & Pettit, F.S. (1999). The effect of water vapor on the oxidation of alloys that develop alumina scales for protection. In METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 30(11), (pp. 2905-2913).Springer Science and Business Media LLC. doi: 10.1007/s11661-999-0128-3.
Pettit, F.S., & Meier, G.H. (1997). Progressing issues related to environmental effects in superalloys, composites and intermetallics. In Proceedings of the Engineering Foundation Conference, (pp. 379-390).
Meier, G.H., & Pettit, F.S. (1993). High temperature corrosion of intermetallics, ceramics, and carbon-carbon composites. In Proceedings from the Conference on Critical Issues in the Development of High Temperature Structural Materials, (pp. 415-430).U.S. Dept. of Defense.
Gulbransen, E.A., & Meier, G.H. (1984). THERMOCHEMISTRY OF FOUR RARE EARTH METALS IN OXIDIZING AND SULFIDING ENVIRONMENTS. In Proceedings - The Electrochemical Society, 84-9, (pp. 185-204).The Electrochem. Soc.
Gulbransen, E.A., & Meier, G.H. (1984). THERMOCHEMISTRY OF FOUR RARE EARTHS METALS IN OXIDIZING AND SULFIDING ENVIRONMENTS. In Electrochemical Society Extended Abstracts, 84-2, (pp. 313-314).
Smidt, F.A., Johnston, G.R., Sprague, J.A., Provenzano, V., Hwang, S.Y., Meier, G.H., & Pettit, F.S. (1984). Modification of the Oxidation and Hot Corrosion Behavior of CoCrAl Alloys by Ion Implantation. In NATO ASI Series, Series E: Applied Sciences, (85), (pp. 507-523).Springer Netherlands. doi: 10.1007/978-94-009-6216-3_34.
Perkins, R.A., & Meier, G.H. (1983). ACOUSTIC EMISSION STUDIES OF HIGH TEMPERATURE OXIDATION. In Proceedings - The Electrochemical Society, 83-7, (pp. 176-189).Electrochem. Soc.
Perkins, R.A., & Meier, G.H. (1983). ACOUSTIC EMISSION STUDIES OF HIGH TEMPERATURE OXIDATION. In Electrochemical Society Extended Abstracts, 83-1, (p. 713).
Meier, G.H., Gulbransen, E.A., & Stoehr, R.A. (1981). HOT CORROSIVITY OF COAL CONVERSION PRODUCTS ON HIGH TEMPERATURE ALLOYS. In Annual Conference on Materials for Coal Conversion and Utilization (Proceedings).
Bryant, W.A., & Meier, G.H. (1975). PREPARATION OF TANTALUM-BASED ALLOYS BY A UNIQUE CVD PROCESS. (pp. 161-177).