PITTSBURGH (October 30, 2018) … The silk fibers produced by Bombyx mori, the domestic silkworm, has been prized for millennia as a strong yet lightweight and luxurious material. Although synthetic polymers like nylon and polyester
are less costly, they do not compare to silk’s natural qualities and mechanical properties. And according to research from the University of Pittsburgh’s Swanson School of Engineering, silk combined with carbon nanotubes may lead to a new generation
of biomedical devices and so-called transient, biodegradable electronics.The study, “Promoting Helix-Rich Structure in Silk Fibroin Films through Molecular Interactions with Carbon Nanotubes and Selective Heating for Transparent Biodegradable
Devices” (DOI: 10.1021/acsanm.8b00784), was featured on the Oct. 26 cover of the American Chemistry Society journal Applied Nano Materials.
“Silk is a very interesting material. It is made of natural fibers that humans have been using for thousands of years to make high quality textiles, but we as engineers have recently started to appreciate silk’s potential for many emerging applications
such as flexible bioelectronics due to its unique biocompatibility, biodegradability and mechanical flexibility,” noted Mostafa Bedewy,
assistant professor of industrial engineering at the Swanson School and lead author of the paper. “The issue is that if we want to use silk for such applications, we don’t want it to be in the form of fibers. Rather, we want to regenerate silk proteins,
called fibroins, in the form of films that exhibit desired optical, mechanical and chemical properties.”
As explained by the authors in the video below, these regenerated silk fibroins (RSFs) however typically are chemically unstable in water and suffer from inferior mechanical properties, owing to the difficulty in precisely controlling the molecular structure
of the fibroin proteins in RSF films. Bedewy and his NanoProduct Lab group, which also work extensively on carbon nanotubes (CNTs), thought that perhaps the molecular interactions between nanotubes and fibroins could enable “tuning” the structure
of RSF proteins. “One of the interesting aspects of CNTs is that, when they are dispersed in a polymer matrix and exposed to microwave radiation, they locally heat up,” Dr. Bedewy explained. “So we wondered whether we could leverage this
unique phenomenon to create desired transformations in the fibroin structure around the CNTs in an “RSF-CNT” composite.”According to Dr. Bedewy, the microwave irradiation, coupled with a solvent vapor treatment, provided a unique control
mechanism for the protein structure and resulted in a flexible and transparent film comparable to synthetic polymers but one that could be both more sustainable and degradable. These RSF-CNT films have potential for use in flexible electronics, biomedical
devices and transient electronics such as sensors that would be used for a desired period inside the body ranging from hours to weeks, and then naturally dissolve. “We are excited about advancing this work further in the future, as we are
looking forward to developing the science and technology aspects of these unique functional materials,” Dr. Bedewy said. “ From a scientific perspective, there is still a lot more to understand about the molecular interactions between the functionalization
on nanotube surfaces and protein molecules. From an engineering perspective, we want to develop scalable manufacturing processes for taking cocoons of natural silk and transforming them into functional thin films for next generation wearable and implantable
About the NanoProduct LabThe NanoProduct Lab (nanoproductlab.org), also known as the Bedewy Research Group, focuses on fundamental experimental research
at the interface between nanoscience, biotechnology, and manufacturing engineering. The group explores basic scientific discoveries and applied technological developments in the broad area of advanced manufacturing at multiple length scales, creating
solutions that impact major societal challenges in energy, healthcare, and the environment.
This work was supported by the Mascaro Center for Sustainable Innovation
(MCSI) at the University of Pittsburgh. M.B. is grateful for the Ralph
E. Powe Junior Faculty Enhancement Award from Oak Ridge Associated
Universities (ORAU). Fabrication and characterization were performed, in
part, at the Nanoscale Fabrication and Characterization Facility, a
laboratory of the Gertrude E. and John M. Petersen Institute of
NanoScience and Engineering, housed at the University of Pittsburgh. The
work was also supported in part by the Basic Science Research Program
through the National Research Foundation of Korea (NRF) funded by the
Ministry of Education (NRF-2018R1A4A1025169).
Image below, left: ACS Applied Nano Materials cover.
Image below, right: Schematic diagram illustrating the structural changes of RSF-CNT composite film exhibited during microwave- and vapor-treatment.
Contact: Paul Kovach