Pitt | Swanson Engineering
Haight, Joel M
Industrial Engineering
Haight, Joel M
Associate Professor and Director, Safety Engineering Program
Faculty
Associate Professor
Office: BENDM 1043
download vcard

Education / Degrees:

PhD (Industrial and Systems Engineering): Auburn University

Professional Interests:

Expertise: Safety Engineering, Human Factors Engineering and Human System Performance 

Profile:  Joel M. Haight joined the Industrial Engineering Department at the University of Pittsburgh in 2013.   In the previous 33 years he served as Chief of the Human Factors Branch at the Centers for Disease Control and Prevention (CDC) - National Institute of Occupational Safety and Health (NIOSH) at their Pittsburgh Office of Mine Safety and Health Research, where he managed a research branch of 35-40 researchers in the areas of ergonomics, cognitive engineering, human behavior and training.  Dr. Haight also served for nearly 10 years, as an Associate Professor of Energy and Mineral Engineering at the Pennsylvania State University.  Dr. Haight worked as a manager and engineer for the Chevron Corporation for 18 years prior to joining the faculty at Penn State.  His research interests include health and safety management systems intervention effectiveness measurement and optimization and human performance measurement in automated control system design 

He is the editor in chief and contributing author of Handbook of Loss Prevention Engineering published by J.W. Wiley and Sons in 2013 and the Safety Professionals Handbook published by the American Society of Safety Engineers in 2012.  In addition he has published nearly 60 refereed journal articles and conference proceedings.  

Dr. Haight is an active member of ASSE, HFES, IIE and AIHA.  He serves as the chair of the research committee for the American Society of Safety Engineers foundation and Board of Trustees member.  He is a licensed professional engineer in Pennsylvania and Alabama and certified by the Board of Certified Safety Professionals and the American Board of Industrial Hygienists. 

Selected Publications:

Haight, J.M., Yorio, P.L., Rost, K.A., Willmer, D.R., Health and Safety Management Systems - a Comparative Analysis of Content and Impact", Professional Safety - The Journal of the American Society of Safety Engineers, Vol. 59, No. 5, May 2014, pp, 44-51 

Yorio, P.L, Willmer, D.R., Haight, J.M., Interpreting MSHA citations through the lens of occupational health and safety management systems: investigating their impact on mine injuries and illnesses, Risk Analysis: An International Journal, DOI:10.1111/risa.12164, January 2014  

Haight, J.M., Safety Issues Related to Petroleum Refineries, Manual 58, Handbook of Petroleum and Natural Gas Refining and Processing, ASTM International, Editor: Semeh Eser, Melville, NY, 2013  

Haight, J.M., Engineering Systems and Engineering Economics of Loss Prevention, - book chapter, Handbook of Loss Prevention Engineering, Wiley - VCH,  Weinheim, Germany, Editor: Joel M. Haight, V.1, 2013  

Haight, J.M., Managing Safety Engineering Work - book chapter, The Safety Professionals Handbook, American Society of Safety Engineers, Editor: Joel M. Haight, 2nd ed.,  V. 1, 2012  

Oyewole, S., Haight, J.M., Incident Rate Forecasting in the Resource Allocation Decision-Making Process of a Safety and Health Intervention Program, International Journal of Engineering, Science and Technology, In Press , manuscript - 11 pages. 

Oyewole, S.A., Farde, A.M., Haight, J.M., & Okareh, O.T., Evaluation of Complex and Dynamic Safety Tasks in Human Learning Using the ACT-R and SOAR Skill Acquisition Theories, Computers in Human Behavior, 2011 , doi:10.1016/j.chb.2011.05.005  

Oyewole, S.A., & Haight, J.M., Determination of Optimal Paths to Task Goals Using Expert System Based on GOMS. Model. Journal of Computers in Human Behavior , Vol. 27, Issue 2, 2011 , pp.823-833.  doi:10.1016/j.chb.2010.11.007  

Oyewole, S.A., Haight, J.M., & Freivalds, A., The Ergonomic Design of Classroom Furniture/Computer Workstation for First Graders in an Elementary School International Journal of Industrial Ergonomics, Vol. 40, Issue 4, 2010 , pp. 437-447 doi:10.1016/j.ergon.2010.02.002  

Oyewole, S.A., Haight, J.M., Freivalds, A., Cannon, D., & Rothrock, L., Statistical Evaluation of Safety Intervention Effectiveness and Optimization of Resource Allocation, Journal of Loss Prevention in the Process Industries , Vol. 23, Issue 5, 2010 , pp 585-593.  doi:10.1016/j.jlp.2010.05.014  

Al-Mutairi, A, Haight, J.M., Forecasting Incident Rates through Artificial Intelligence, Professional Safety - The Journal of the American Society of Safety Engineers, Vol. 54, No. 9, September 2009 , pp. 40-48. 

Lehman, C.C., Haight, J.M., Michael, J.H.,Effects of Safety Training on Risk Tolerance: An examination of male workers in the Surface Mining Industry, Journal of Safety, Health and Environmental Research, Vol.6, No.1, Spring, 2009 , pp. online journal (22 pages). 

Shakioye, S.O., Haight, J.M. Modeling using dynamic variables - An approach for the design of loss prevention programs. Safety Sciences, 2009 , doi:10.1016/j.ssci.2009.04.008  

Haight, J.M., Managing Safety Engineering Work - chapter, The Safety Professionals Handbook, American Society of Safety Engineers, Editor: Joel M. Haight, Vol. 1, 2008

Shim, D., Kim, J.Y., Hallbeck, M.S., Haight, J.M., Jung, M.C., Ergonomic Hand Tool and Desk and Chair Development Process, The International Journal of Occupational Safety and Ergonomics, Vol. 14, No. 2, 2008 , pp. 247-252 

PhD in Industrial and Systems Engineering, Auburn University, 1999

MIE in Industrial Engineering, Auburn University, 1994

BS in Safety Sciences, Indiana University of Pennsylvania, 1981

Human Factors Engineering and Human Error

Intervention Effectiveness

(2013) American Society of Safety Engineers, Safety Professional of the Year for Engineering Practice Specialty.

(2012) American Society of Safety Engineers - Charles Cultbertson Award for Outstanding Service to ASSE for Editing "The Safety Professional's Handbook" 2nd Ed..

(2011) American Society of Safety Engineers, "Best of the Best" award for article written in "The Educator".

(2008) American Society of Safety Engineers - Charles Cultbertson Award for Meritorious Service to the Council on Practices and Standards.

(2008) Editor-in-Chief, American Society of Safety Engineers - Charles Culbertson Award for Outstanding Service to ASSE for Editing "The Safety Professional's Handbook" - Published 2008.

(2005) William Tarrants, PPG - Outstanding Educator Award - American Society of Safety Engineers.

(2004) American Society of Safety Engineer - Professional Paper Award - 1st Place.

Oyewole, S., and Haight, J., In press, "Incident Rate Forecasting in the Resource Allocation Decision-Making Process of a Safety and Health Intervention Program," International Journal of Engineering, Science and Technology, 11 pages.

Haight, J., and Behm, M., 2014, "The Contribution of Research to Education in the Safety Field," American Society of Safety Engineers Professional Development Conference, Orlando, FL.

Haight, J., Yorio, P.L., Rost, K.A., and Willmer, D.R., 2014, "Health and Safety Management Systems - a Comparative Analysis of Content and Impact," Professional Safety - The Journal of the American Society of Safety Engineers, vol.59, no.5, pp. 44-51.

Yorio, P.L., Willmer, D.R., and Haight, J., 2014, "Interpreting MSHA citations through the lens of occupational health and safety management systems: investigating their impact on mine injuries and illnesses," Risk Analysis: An International Journal.

Haight, J., 2013, "Engineering Systems and Engineering Economics of Loss Prevention," in Handbook of Loss Prevention Engineering, V.1, J. Haight, ed., Wiley - VCH, Weinheim, Germany.

Haight, J., Yorio, P., and Willmer, D.R., 2013, "Health and Safety Management Systems - A Comparative Analysis of Content and Impact," American Society of Safety Engineers Professional Development Conference, Las Vegas, NV.

Haight, J., 2012, "Delving Into Mining Research," The Synergist, vol.23, no.5, pp. 42-44.

Haight, J., 2012, "Managing Safety Engineering Work," in The Safety Professionals Handbook, American Society of Safety Engineers, V.1, J. Haight, ed..

Haight, J., 2011, "Human Reliability Analysis-Cardiac Hospital Case Study with New Applicability," American Society of Safety Engineers Professional Development Conference, Chicago, IL.

Haight, J., 2011, "Research to Practice in a Safety Context," The Educator - Technical publication of the American Society of Safety Engineers' Academics Practice Specialty, vol.8, no.3.

Oyewole, S.A., and Haight, J., 2011, "Determination of Optimal Paths to Task Goals Using Expert System Based on GOMS. Model," Journal of Computers in Human Behavior, vol.27, no.2, pp. 823-833.

Oyewole, S.A., Farde, A.M., Haight, J., and Okareh, O.T., 2011, "Evaluation of Complex and Dynamic Safety Tasks in Human Learning Using the ACT-R and SOAR Skill Acquisition Theories," Computers in Human Behavior.

Haight, J., 2010, "Research to Practice," American Society of Safety Engineers Professional Development Conference, Baltimore, MD.

Ismail Mohd, N., and Haight, J., 2010, "Aging Workers in Small Mines," American Society of Safety Engineers Professional Development Conference, Baltimore, MD.

Oyewole, S.A., Haight, J., and Freivalds, A., 2010, "The Ergonomic Design of Classroom Furniture/Computer Workstation for First Graders in an Elementary School," International Journal of Industrial Ergonomics, vol.40, no.4, pp. 437-447.

Oyewole, S.A., Haight, J., Freivalds, A., Cannon, D., and Rothrock, L., 2010, "Statistical Evaluation of Safety Intervention Effectiveness and Optimization of Resource Allocation," Journal of Loss Prevention in the Process Industries, vol.23, no.5, pp. 585-593.

2009, "Making the Business Case: Assessment of Safety Intervention and Optimization of Resource Allocation," American Society of Safety Engineers Professional Development Conference, San Antonio, TX.

Al-Mutairi, A., and Haight, J., 2009, "Forecasting Incident Rates through Artificial Intelligence," Professional Safety - The Journal of the American Society of Safety Engineers, vol.54, no.9, pp. 40-48.

Lehman, C.C., Haight, J., and Michael, J.H., 2009, "Effects of Safety Training on Risk Tolerance: An examination of male workers in the Surface Mining Industry," Journal of Safety, Health and Environmental Research, vol.6, no.1, 22 pages.

Shakioye, S.O., and Haight, J., 2009, "Modeling using dynamic variables - An approach for the design of loss prevention programs.," Safety Sciences.

Haight, J., 2008, "Managing Safety Engineering Work," in The Safety Professionals Handbook, American Society of Safety Engineers. Vol. 1, J. Haight, ed..

Oyewole, S.A., Haight, J., and Freivalds, A., 2008, "A Statistical Technique to Assess Safety Intervention and Resource Allocation Optimization," 26th International System Safety Conference (ISSC), Vancouver, Canada.

Oyewole, S.A., and Haight, J., 2008, "Assessing the Impact of Loss Prevention and Resource Allocation Optimization using Forecasting Methods," 3rd Institution of Engineering and Technology (IET) International Conference on System Safety Organized by the IET Functional Safety Network, NEC, Birmingham, UK.

Shakirundeen, S., and Haight, J., 2008, "Intervention Effectiveness Research - Computer Modeling of Safety and health Program Design and Incident Rate Forecasting," American Society of Safety Engineers Professional Development Conference, Las Vegas, NV.

Shim, D., Kim, J.Y., Hallbeck, M.S., Haight, J., and Jung, M.C., 2008, "Ergonomic Hand Tool and Desk and Chair Development Process," The International Journal of Occupational Safety and Ergonomics, vol.14, no.2, pp. 247-252.

Haight, J., 2007, "Do Automated Control Systems Reduce Human Error and Incidents?," Professional Safety - The Journal of the American Society of Safety Engineers, vol.52, no.5, pp. 20-27.

Haight, J., and Caringi, R.G., 2007, "Automation vs. Human Intervention What is the best mix for optimum system performance?," A Case Study, International Journal of Risk Assessment and Management, vol.7, no.5, pp. 708-721.

Agraz-Boenekar, R., Groves, W.A., and Haight, J., 2007, "An Examination of Observations and Incidence Rates for a Behavior Based Safety Program," Journal of Safety, Health and Environmental Research, vol.4, no.3, 22 pages.

Al-Mutairi, A., and Haight, J., 2007, "Forecasting Incident Rates Using Artificial Intelligence," American Society of Safety Engineers Professional Development Conference, Orlando, FL.

Jung, M.C., Haight, J., and Hallbeck, M.S., 2007, "Biomechanical and Physiological Analysis of a Luggage Pulling Task," Journal of Industrial Health, vol.45, no.6, pp. 95-100.

Wincek, J.C., and Haight, J., 2007, "Realistic human error rates for process hazard analyses," Process Safety Progress Journal, American Institute of Chemical Engineers, vol.26, no.2.

Haight, J., 2006, "Do Automated Control Systems Really Reduce Human Errors and Incidents?," American Society of Safety Engineers Professional Development Conference, Seattle, WA.

Haight, J., 2006, "Do Automated Control Systems Reduce Human Errors and Incidents?," American Society of Safety Engineers Technology Symposium, Scottsdale, AZ.

Haight, J., and Belwal, U., 2006, "Can We and Do We Need to Design for an Aging Workforce?," Professional Safety - The Journal of the American Society of Safety Engineers, vol.51, no.7, pp. 20-33.

Devon, R., and Haight, J., 2006, "Katrina in the Classroom: Engineering and Public Policy through Project-Based Learning," American Society for Engineering Education Conference, Chicago, IL.

Jung, M.C., Haight, J., and Freivalds, A., 2006, "Luggage-pulling task evaluation by kinematics and subjective ratings," The Journal of Safety, Health and Environmental Research, vol.3, no.1, 34 pages.

Haight, J., 2005, "Designing for an Aging Workforce," American Society of Safety Engineers, Manufacturing Safety Symposium, Atlanta, GA.

Haight, J., and Kecojevic, V., 2005, "Automation vs. Human Intervention - What is the Best Fit for the Optimal System Performance?," Process Safety Progress Journal, American Institute of Chemical Engineers, vol.24, no.1, pp. 45-51.

Belwal, U., 2005, "Designing for an Aging Workforce," American Society of Safety Engineers Professional Development Conference, New Orleans, LA.

Iyer, P., and Haight, J., 2005, "Leading Indicator Research: Understanding Industrial Safety Programs and Optimizing Their component Intervention Strategies," American Society of Safety Engineers Professional Development Conference, New Orleans, LA.

Iyer, P.S., Haight, J., del Castillo, E., Tink, B.W., and Hawkins, P.W., 2005, "A Research Model - Forecasting Incident Rates from Optimized Safety Program Intervention Strategies," Journal of Safety Research, vol.36, no.4, pp. 341-351.

Jung, M.C., Haight, J., and Freivalds, A., 2005, "Literature Review of Manual Wheeled Devices," International Journal of Ergonomics, vol.35, pp. 79-89.

Kecojevic, V., Bise, C., and Haight, J., 2005, "Teaching and Learning - Professional Software in an Undergraduate Mining Engineering Curriculum," Interactive Learning Environments, vol.13, no.1-2, pp. 1-13.

Kim, J.Y., Jung, M.C., and Haight, J., 2005, "The Sensitivity of Autoregressive Model Coefficient in Quantification of Trunk Muscle Fatigue During a Sustained Isometric Contraction," International Journal of Industrial Ergonomics, vol.35, pp. 321-220.

Lee, S., 2005, "Loss Prevention in Chemical Processing," in Encyclopedia of Chemical Processing, J. Haight, ed., Taylor & Francis, Inc., pp. 1483-1492, New York.

Michael, J., Evans, D., Jansen, K., and Haight, J., 2005, "Relationship Between Management Commitment to Safety and Employee Outcomes: An Exploratory Study With Wood Manufacturing Employees," Journal of Safety Research, vol.36, no.2, pp. 171-179.

Haight, J., Brauer, R., Mroszcyk, J., Hansen, M., Kerk, C., and Stickle, R., 2004, "Roundtable Discussion: Where does the Safety Engineering Discipline fit into the Safety Profession?," American Society of Safety Engineers Professional Development Conference, Las Vegas, NV.

Iyer, P., Haight, J., Del Castillo, E., Tink, B.W., and Hawkins, P.W., 2004, "Intervention Effectiveness Research: Understanding and Optimizing Industrial Safety Programs Using Leading Indicators," Chemical Health and Safety - American Chemical Society - Division of Chemical Health and Safety, vol.11, no.2, pp. 9-19.

Haight, J., 2003, "Human Error and the Challenges of an Aging Work Force," Professional Safety - Journal of the American Society of Safety Engineers, vol.48, no.12, pp. 18-24.

Haight, J., 2003, "Human Error and the Challenges of an Aging Workforce," Human Error in Occupational Safety: Recognition, Analysis and Control Symposium, Atlanta, GA.

Haight, J., 2003, "To Err is Human and That is a Challenge for Engineers," Engineering Times, the National Society of Professional Engineers, vol.25, no.4.

Haight, J., and Thomas, R.E., 2003, "Intervention Effectiveness Research - A Review of the Literature on "Leading Indicators"," Chemical Health and Safety - American Chemical Society - Division of Chemical Health and Safety, vol.10, no.2, pp. 21-25.

Baybutt, P., and Haight, J., 2003, "Analysis of Human Factors for Process Safety - Application of Levels of Protection Analysis - Human Factors to Fired Furnace," Hydrocarbon Processing.

Jung, M.C., Haight, J., and Frievalds, A., 2003, "Kinematic Evaluation of Pulling Carry-on Luggage," Human Factors and Ergonomics Society 47th Annual Meeting, pp. 1290-1294, Denver, CO.

Haight, J., 2002, "Human Error and the Engineering Challenges of an Aging Workforce," American Society of Safety Engineers, Engineering Practice Specialty Newsletter.

Haight, J., 2002, "Intervention Effectiveness Research - Engineering Design of Safety and Health Programs by Optimizing Intervention Activity," American Society of Safety Engineers Professional Development Conference, Nashville, TN.

Haight, J., 2002, "Is Your Process Safety Management Program Effective?," American Society of Safety Engineers, Engineering Practice Specialty Newsletter.

Haight, J., Thomas, R.E., Smith, L.A., Bulfin, R.L., and Hopkins, B.L., 2001, "An Analysis of the Effectiveness of Loss Prevention Interventions: Design, Optimization, and Verification of the Loss Prevention System and Analysis Model (Phase 2)," Professional Safety - The Journal of the American Society of Safety Engineers, vol.46, no.6, pp. 33-37.

Haight, J., Thomas, R.E., Smith, L.A., Bulfin, R.L., and Hopkins, B.L., 2001, "Evaluating the Effectiveness of Loss Prevention Interventions: Developing the Mathematical Relationship Between Interventions and Incident Rates for the Design of a Loss Prevention System (Phase 1)," Professional Safety - The Journal of the American Society of Safety Engineers, vol.46, no.5, pp. 38-44.

Haight, J., 2014, "Designing for an Aging Workforce," Arthur J. Gallagher and Co. Top Cause of Loss Symposium, Webinar.

Haight, J., 2014, "Designing for an Aging Workforce," National Webinar Series, Arthur J. Gallagher & Company.

Haight, J., 2014, "The Contribution of Research to Education in the Safety Field," American Society of Safety Engineers Professional Development Conference, Orlando, FL.

Yorio, P.L., Willmer, D.R., and Haight, J., 2014, "Interpreting MSHA Citations Through the Lens of Occupational Health and Safety Management Systems: Investigating Their Impact on Mine Injuries and Illnesses 2003--2010," 2014 NIOSH Intramural Science Meeting (NISM), Morgantown, West Virginia.

Haight, J., 2013, "Health and Safety Management Systems - A Comparative Analysis of Content and Impact," American Society of Safety Engineers Professional Development Conference, Las Vegas, NV.

Haight, J., 2012, "Applied Research in Energy at NIOSH," Graduate Symposium, The Pennsylvania State University.

Haight, J., 2012, "Ergonomics and Human Factors Research at NIOSH's Office of Mine Safety and Health Research and It's Applicability and Use in Industry," The Lucien Brouha Work Physiology Symposium, Auburn University.

Haight, J., 2012, "Intervention Effectiveness Research - Improvement of Injury Prevention," Industrial Engineering Graduate Seminar, The University of Pittsburgh.

Haight, J., 2011, "Current NIOSH Research in Mining Safety and Health," The Graduate Seminar Series on Injury Research and Policy, the Center for Injury Research and Policy and the Department of Health Policy and Management, Johns Hopkins University, Baltimore, MD.

Haight, J., 2011, "Human Reliability Analysis-Cardiac Hospital Case Study with New Applicability," American Society of Safety Engineers Professional Development Conference, Chicago, IL.

Haight, J., 2011, "Keynote Address - NIOSH Projects Update," Central Pennsylvania Safety Association Professional Development Conference, Sponsored by the Central Pennsylvania Chapter of the American Industrial Hygiene Association, University Park, PA.

Haight, J., 2011, "NIOSH Mining Research Status," KOMAG Institute of Mining Technology, Technical Colloquium, Gliwice, Poland.

Haight, J., 2010, "Buy In, How to Create, Develop and Maintain It," World of Concrete Conference, Las Vegas, NV.

Haight, J., 2010, "Human Factors Research at NIOSH's Office of Mine Safety and Health Research," 6th Annual Western Region Mine Safety and Health Conference, Reno, NV.

Haight, J., 2010, "Research to Practice," American Society of Safety Engineers Professional Development Conference, Baltimore, MD.

Ismail Mohd, N., and Haight, J., 2010, "Aging Workers in Small Mines," American Society of Safety Engineers Professional Development Conference, Baltimore, MD.

Haight, J., 2008, "Round Table - Designing for Aging Workers," American Industrial Hygiene Association Conference and Exposition, Minneapolis, MN.

2007, "Mining Industry Fatality Prevention Coordination Presentation," Alcoa Foundation - A Forum on Fatality Prevention in the Workplace, Pittsburgh, PA.

Al-Mutairi, A., and Haight, J., 2007, "Forecasting Incident Rates Using Artificial Intelligence," American Society of Safety Engineers Professional Development Conference, Orlando, FL.

Haight, J., 2005, "Designing for an Aging Workforce," American Society of Safety Engineers, Manufacturing Safety Symposium, Atlanta, GA.

Haight, J., 2003, "Human Error and the Challenges of an Aging Workforce," American Society of Safety Engineers - Human Error in Occupational Safety: Recognition, Analysis and Control Symposium, Atlanta, GA.

Haight, J., 2002, "Corrective Action Research," TapRoot Incident Investigation and Problem Solvers' Conference, Gatlinburg, TN.

Haight, J., 2001, "Root Cause Analysis," Baker Tools Annual Safety Professionals Meeting, Aberdeen, Scotland, U.K..

Haight, J., 2002, "Behavior Contributions to Workplace Injuries," Chevron Corporation's African Safety Professionals Safety Conference, Luanda, Angola.

Haight, J., 2002, "Behavior Contributions to Workplace Injuries," Chevron Corporation's African Safety Professionals Safety Conference, Muanda, Democratic Republic of the Congo.

Haight, J., 2002, "Behavior Contributions to Workplace Injuries," Chevron Corporation's African Safety Professionals Safety Meeting, Malongo, Cabinda, Angola.

Haight, J., 2002, "Intervention Effectiveness Research - Engineering Design of Safety and Health Programs by Optimizing Intervention Activity," American Society of Safety Engineers Professional Development Conference, Nashville, TN.

Haight, J., 2002, "The Health and Safety Challenges of an Aging Workforce," Alabama Governor's Safety and Health Conference, Mobile/Orange Beach, AL.

Haight, J., 2004, "Human Error in an Aging Workforce - Designing for Older Workers," Alabama Governor's Conference on Health and Safety, Orange Beach, AL.

Haight, J., 2004, "Human Error in an Aging Workforce," Iowa-Illinois Safety Council Professional Development Conference, Davenport, IA.

Haight, J., 2004, "Safety and Health Intervention Effectiveness Research," Global Mining Research Alliance (GMRA) meeting, Nemacolin Woodlands Resort, Farmington, PA.

Haight, J., 2004, "Safety and Health Intervention Effectiveness Research," Mine Safety and Health Research Advisory Committee Meeting (NIOSH), Washington, D.C..

Haight, J., 2005, "Design and Accommodations for an Aging Workforce," 6th Annual Western Region Mine Safety and Health Conference, Reno, NV.

Haight, J., 2005, "Intervention Effectiveness Research - Design and Optimize a Safety and Health Program," Deep South Center for Occupational Safety and Health, an Educational Resource Center for the National Institute of Occupational Safety and Health, Annual Research Symposium, Auburn University.

Haight, J., 2006, "Do Automated Control Systems Really Reduce Human Error and Incidents?," Human Performance, Root Cause, Corrective Action and Trending Conference (HPRCT), 12th Annual Conference, Charleston, SC.

Haight, J., 2006, "Do Automated Control Systems Really Reduce Human Errors and Incidents?," American Society of Safety Engineers Professional Development Conference, Seattle, WA.

Haight, J., 2006, "Do Automated Control Systems Reduce Human Errors and Incidents?," American Society of Safety Engineers Technology Symposium, Scottsdale, AZ.

Haight, J., 2006, "Measuring the Effectiveness of Your Improvements," Human Performance, Root Cause, Corrective Action and Trending Conference (HPRCT), 12th Annual Conference, Charleston, SC.

Haight, J., 2006, "Process Safety Management Audits, Benefit or Hindrance," Avery Dennison Safety Meeting, Kreuzlingen, Switzerland.

Haight, J., 2006, "Strategies for Reducing Human Error and Injuries When Your Work Force is Aging," Human Performance, Root Cause, Corrective Action and Trending Conference (HPRCT), 12th Annual Conference, Charleston, SC.

Haight, J., 2007, "Aging Workers' Safety Related Concerns," Health Risk to Resolution Summit: Tools to Total Health, Communication Strategies, Pittsburgh, PA.

Haight, J., 2007, "Designing for Aging Workers," American Society of Safety Engineers, Web Cast Seminar, University Park, PA.

Haight, J., 2007, "Ergonomics in Local Industry," Blair County Chamber of Commerce meeting, Altoona, PA.

Haight, J., 2007, "Fault Tree Analysis - Role in Incident Investigations," TapRoot Incident Investigation Summit, San Antonio, TX.

Haight, J., 2007, "Incident Investigations Lessons Learned in Process Industries," TapRoot Incident Investigation Summit, San Antonio, TX.

Haight, J., 2008, "Dynamic Modeling, An Approach For the Design of Loss Prevention Programs," Institute of Industrial Engineers National Academic Conference, Instituto TecnolÓgicio de Hermosillo, Hermosillo, Sonora, Mexico.

Haight, J., 2009, "Concern for Human Error and Injury When Your Workforce is Aging," International Association of Industrial Accidents Board and Commissions Conference, Minneapolis, MN.

Haight, J., 2010, "Leading Indicator Research," Synergy II, VPPAC and World of Concrete Conference, Las Vegas, NV.

Haight, J., and Shakioye, S., 2007, "Health Risk to Resolution Summit: Tools to Total Health, Communication Strategies," Hydro One Corporate Safety Meeting, Toronto, Ontario, Canada.

Haight, J., Brauer, R., Mroszcyk, J., Hansen, M., Kerk, C., and Stickle, R., 2004, "Roundtable Discussion: Where does the Safety Engineering Discipline fit into the Safety Profession?," American Society of Safety Engineers Professional Development Conference, Las Vegas, NV.

Belwal, U., and Haight, J., 2005, "Designing for an Aging Workforce," American Society of Safety Engineers Professional Development Conference, New Orleans, LA.

Devon, R., and Haight, J., 2006, "Katrina in the Classroom: Engineering and Public Policy through Project-Based Learning," American Society for Engineering Education Conference, Chicago, IL.

Iyer, P., and Haight, J., 2005, "Leading Indicator Research: Understanding Industrial Safety Programs and Optimizing their Component Intervention Strategies," American Society of Safety Engineers Professional Development Conference, New Orleans, LA.

Jung, M.C., Haight, J., and Freivalds, A., 2003, "Kinematic Evaluation of Pulling Carry-on Luggage," Human Factors and Ergonomics Society 47th Annual Meeting, Denver, CO.

Mohd Ismail, N.M., and Haight, J., 2009, "Performance of Aging Workers - Is there a need for Redesign or Accommodations," Pennsylvania Governor's Occupational Safety and Health Conference, Hershey, PA.

Oyelwole, S.A., and Haight, J., 2009, "Making the Business Case: Assessment of Safety Intervention and Optimization of Resource Allocation," American Society of Safety Engineers Professional Development Conference, San Antonio, TX.

Shakirundeen, S., and Haight, J., 2008, "., Intervention Effectiveness Research - Computer Modeling of Safety and health Program Design and Incident Rate Forecasting," American Society of Safety Engineers Professional Development Conference, Las Vegas, NV.

Publication   Role
Journal of Safety, Health and Environmental Research – American Society of Safety Engineers - Official Journal of the Academics Practice Specialty 
 
Editorial Board Member
 
Process Safety Progress – Journal of the Center for Chemical Process Safety of the American Institute of Chemical Engineers 
Editorial Board Member

IIE Transactions on Occupational Ergonomics and Human Factors, Institute of Industrial Engineers 
Editorial Board Member

Risk Analysis – An International Journal 
Editorial Board Member

Safety and Health at Work
Editorial Board Member

Process Safety and Environmental Protection - Official journal of the European Federation of Chemical Engineering: Part B
Editorial Board Member
Journal of Loss Prevention in the Process Industries - The International Journal of Chemical and Process Plant Safety
Editorial Board Member