Pitt | Swanson Engineering
Miller, Mark C
Mechanical Engineering & Materials Science, Bioengineering Department
Miller, Mark C
Faculty
Research Associate Professor
Office: Biomechanics Laboratory
download vcard

PhD, Applied Mechanics, University of Michigan, 1990
MS, Mechanical Engineering, University of Michigan, 1981
BS, Mechanical Engineering, University of Michigan, 1980 

Dr. Miller's research interests focus on human motion and related health problems.  These interests include all mechanical aspects of orthopaedic surgery, with an emphasis on problems of the elbow, especially those related to overhand throwing.  The kinematics of the elbow and the behavior of the soft tissue connections at the elbow are topics of current research.  Laboratory studies also include fixation with fracture repair, mechanical analysis of foot pathologies and repair of transected digital nerves.  

(2001) Ranawat Award, 2001 Knee Society research award from the American Academy of Orthopaedic Surgeons, for "A Justification for the Use of the Epicondylar Axis for Femoral Component Rotation in TKA".

(2001) Presidential Scholarship Award, 2001, Duquesne University.

(1980) Federal Pacific Electric Graduate Fellowship, 1980.

Tau Beta Pi, Member, Engineering honor society.

Pi Tau Sigma, member, mechanical engineering honor society.

Muriuki, M.G., Mohagheh-Motlagh, A., Smolinski, P.J., and Miller, M.C., 2012, "Elbow Helical Axes of Motion are not the same in Physiologic and Kinetic Joint Simulators DOI:10.1016/j.jbiomech.2012.06.021," To appear in Journal of Biomechanics.

Miller, M.C., Jarret, C., Weir, D.M., Brown, B.T., Latona, C., and Schmidt, C.C., 2012, "Bone Wafer Thickness in Lesser Tuberosity Osteotomy Repairs during Total Shoulder Arthroplasty," Transactions of the Orthopaedic Research Society.

Kim, S., and Miller, M.C., 2012, "Contact Stress Analysis of the Radial Head and Radial Head Implants," American Society of Biomechanics Annual Meeting.

Muriuki, M.G., Mohaghegh-Motlagh, A., Davis, D., Smolinski, P.J., and Miller, M.C., 2012, "Elbow Helical Axes of Motion: A Comparison between an Elbow Simulator and a Robotic System," Transactions of the Orthopaedic Research Society.

Muriuki, M.G., Owens, R.G., Nye, D., Galvin, C.M., Corson, D., Latona, C., Conti, S.F., and Miller, M.C., 2012, "The Relative and Absolute Bone Density at the TMT Joint in Hallux Valgus," Transactions of the Orthopaedic Research Society.

Muriuki, M.G., Petersen, D.J., Mohaghegh-Motlagh, A., DeMeo, P.J., Akhavan, S., Smolinski, P.J., and Miller, M.C., 2012, "Measurement of Robotically Applied Strain in the Medial Ulnar Collateral Ligament," Transactions of the Orthopaedic Research Society.

Muriuki, M.G., Schimoler, P.J., Campbell, B.C., Vaccariello, M.A., Snell, E., Akhavan, A., DeMeo, P.J., and Miller, M.C., 2012, "The Medial Ulnar Collateral Ligament Carries No Load During Passive Flexion-Extension," American Society of Biomechanics Annual Meeting.

Schimoler, P.J., Vipperman, J.S., and Miller, M.C., 2012, "An Iterative Learning Controller for an Elbow Simulator to Maintain Flexion Angle During Supination," American Society of Biomechanics Annual Meeting.

Schmidt, C.C., DeGravelle, M., Sawardeker, P., Jarret, C., Weir, D., Brown, B., Latona, C., and Miller, M.C., 2012, "Effect Of Lesser Tuberosity Osteotomy Size And Repair Construct During Total Shoulder Arthroplasty," Closed Meeting of the American Shoulder and Elbow Surgeons (ASES) 2012.

Schmidt, C.C., Diaz, V.A., Weir, D.M., Latona, C.R., and Miller, M.C., 2012, "Repaired Distal Biceps MRI Anatomy Compared with Outcome," Journal of Shoulder & Elbow Surgery.

Tupis, T., Altman, G.T., Altman, D.T., Cook, H.A., and Miller, M.C., 2012, "Femoral Bone Strains During Antegrade Nailing: A Comparison of Two Entry Points with Identical Nails Using Finite Element Analysis DOI: 10.1016," Clinical Biomechanics, vol.27, pp. 354-359.

Williams, B.G., Sotereanos, D.G., Baratz, M.E., Jarrett, C.D., Venouziou, A., and Miller, M.C., 2012, "The contracted elbow: is ulnar nerve release necessary?," Journal of Shoulder and Elbow Surgery.

Zunkiewicz, M.R., Clemente Harlan, J.S., Miller, M.C., Baratz, M.E., Wysocki, R.W., and Cohen, M.S., 2012, "Radial Head Replacement with a Bipolar System: A Minimum Two-Year Follow-up," Journal of Shoulder and Elbow Surgery, vol.1, pp. 98-104.

Miller, M.C., Cook, H.A., Naujoks, R., Druschel, M.J., and Baratz, M.E., 2011, "Complete Characterization of the Cartilage Thickness of the Radial Head," Transactions of the Orthopaedic Research Society Annual Meeting.

Miller, M.C., Diaz, V.A., Weir, D.M., Latona, C., and Schmidt, C.C., 2011, "MRI Appearance of Distal Biceps Tendon Repair and Functional Outcome," Transactions of the Orthopaedic Research Society Annual Meeting.

Jarrett, C.D., Weir, D.M., Stuffmann, E.S., Jain, S., Miller, M.C., and Schmidt, C.C., 2011, "Anatomic and Biomechanical Analysis of the Short and Long Head Components of the Distal Biceps Tendon," E-Preprint, Journal of Shoulder and Elbow Surgery.

Kim, S., Baratz, M.D., and Miller, M.C., 2011, "Contact Stress Analysis of the Elbow Joint; Design of Radial head Replacements," Transactions of the Orthopaedic Research Society Annual Meeting.

Kim, S., Greenleaf, R., Miller, M.C., Satish, L., Kathju, S., Post, J.C., Ehrlich, G.D., Sotereanos, N., and Stoodley, P., 2011, "Mechanical effects, antimicrobial efficacy and cytotoxicity of usnic as a biofilm prophylaxis in PMMA," Journal of Materials Science: Materials in Medicine, vol.22, no.12, pp. 2773-2780.

Owens, R.F., Conti, S.F., Muriuki, M.G., and Miller, M.C., 2011, "Comparison of Joint Compression and Contact Area using Locking Compression Plate versus Lag Screw Fixation in a Single Joint Midfoot Fusion Model," American Orthopaedic Foot and Ankle Society, 27th Annual Meeting.

Owens, R.F., Nye, D.D., Conti, S.F., Corson, D., Latona, C., Miller, M.C., Muriuki, M.G., and Galvin, C., 2011, "Relative and Absolute Bone Density at the First Tarsometatarsal Joint in Bunion Feet," American Orthopaedic Foot and Ankle Society, 27th Annual Meeting.

Schmidt, C.C., Diaz, V.A., Weir, D.M., Latona, C., and Miller, M.C., 2011, "MRI Appearance of Distal Biceps Tendon Repair and Comparison with Functional Outcome," American Academy of Orthopaedic surgeons, American Shoulder and Elbow Surgeons Specialty Day.

Tanaka, M.L., Weisenbach, C.A., Miller, M.C., and Kuxhaus, L., 2011, "A Continuous Method to Compute Model Parameters for Soft Biological Materials," Journal of Biomechanical Engineering, vol.133, no.7.

Miller, M.C., Cook, H., and DeMeo, P.J., 2010, "Computational Study of the Stress in the Medial Epicondyle Before and After UCL Reconstruction," Transactions of the Orthopaedic Research Society.

Cook, H.A., Akhavan, S., DeMeo, P.J., and Miller, M.C., 2010, "Finite element Analysis of the Ulnar Tunnel in Ulnar Collateral Ligament Reconstruction," American Society of Mechanical Engineers Bioengineering Division Annual Meeting.

DeMeo, P.J., Johnson, E.M., Chiang, P.P., Flamm, A.M., and Miller, M.C., 2010, "Midterm Follow-up of Opening-Wedge High Tibial Osteotomy DOI: 10.1177/0363546546510371371," American Journal of Sports Medicine, vol.38, pp. 2077-2084.

Druschel, M., Palmer, B., Baratz, M.E., and Miller, M.C., 2010, "Mason II Fractures with Three Millimeter Displacement Require Reduction," American Society of Biomechanics.

Mohaghegh-Motlagh, A., Cook, H.A., Kim, S., DeMeo, P.J., Akhavan, S., and Miller, M.C., 2010, "The strain in the medial ulnar collateral ligament is localized in both the anterior and posterior bands of the anterior bundle," American Society of Mechanical Engineers Bioengineering Division Annual Meeting.

Schmidt, C.C., Weir, D.M., Wong, A.S., Howard, M., and Miller, M.C., 2010, "The effects of biceps reattachment site; 10.1016/j.jse.2010.05.027," Journal of Shoulder and Elbow Surgery, vol.19, no.8, pp. 1157-1165.

Schmidt, C.C., Wong, A., Howard, M., Miller, M.C., and Weir, D.M., 2010, "The Effect of Biceps Reattachment Site on Moment Arm and Forearm Rotation," American Academy for Orthopaedic Surgery.

Weir, D., Schmidt, C., Wong, A., Howard, M., and Miller, M.C., 2010, "The Effect of Biceps Reattachment Site on Moment Arm," Transactions of the Orthopaedic Research Society.

Alfaro, F., Weiss, L., Campbell, P., Miller, M.C., and Fedder, G.K., 2009, "Design of a multi-axis implantable MEMS sensor for intraosseous bone stress monitoring," Journal of Micromechanics and Microengineering, 19 085016 (13pp).

Cook, H.A., Miller, M.C., Tupic, T.M., Altman, T.M., and Altman, G.T., 2009, "Lower Stresses Occur with a Piriformis Fossa than a Greater Trochanter Entry During Femoral Intramedullary Nail Insertion: a Modeling Study," Transactions of the Orthopaedic Research Society 55th Annual Meeting.

Johnson, E.M., DeMeo, P.J., Chiang, P.P., Flamm, A.F., Miller, M.C., and Greer, W.J., 2009, "Long Term Follow-up of Opening Wedge High Tibial Osteotomy," Annual Meeting of the AOSSM.

Kuxhaus, L., Brogdon, M., Druschel, M., Marchessault, J., and Miller, M.C., 2009, "A Method to quantify the Influence of Radial Head Fracture Location on elbow Kinematics," American Society of Biomechanics.

Kuxhaus, L., Dazen, D., Hofer, A., Sotereanos, N., and Miller, M.C., 2009, "A Comparison of Two Hip Stem Styles: Subsidence, Failure Load, and Bone Density," ASME Bioengineering Conference.

Kuxhaus, L., Schimoler, P.J., Vipperman, J., and Miller, M.C., 2009, "Validation of a Feedback-Controlled Elbow Simulator," Journal of Medical Devices, 031002(7p), vol.3, no.3.

Kuxhaus, L., Schimoler, P.J., Vipperman, J.S., and Miller, M.C., 2009, "Effects of camera switching on fine accuracy in a motion capture system," Journal of Biomechanical Engineering, pp.014502:1-6, vol.131.

Purnell, G., Altman, D.T., Altman, G.T., Muffly, M.T., and Miller, M.C., 2009, "Results of a CT Protocol Evaluating Distal third Tibia Fractures to Detect Occult Ankle Fractures," American Academy of Orthopaedic Surgeons, Annual Meeting.

Rutkowski, M.M., Smolinski, P.J., and Miller, M.C., 2009, "The Geometry of Vacuum Assisted Interface Adhesion: Resistance to Axial Moment," Vacuum, vol.83, pp. 869-872.

Schimoler, P.J., Kuxhaus, L., Vipperman, J.S., and Miller, M.C., 2009, "Robotic controller design for an elbow simulator," Biomedical Engineering Society.

Sotereanos, D.G., Kokkalis, D.G., Darlis, N.A., Zanaros, G., Altman, G.T., and Miller, M.C., 2009, "Effects of Radiofrequency Probe Application on Irrigation Fluid Temperature in the Wrist Joint," Journal of Hand Surgery, vol.34, no.10, pp. 1832-1837.

Weir, D.M., Wong, A., Howard, M., Schmidt, C.C., and Miller, M.C., 2009, "Design of a Device to Measure Isometric Forearm Torque," Biomedical Engineering Society.

Miller, M.C., Clemente, J., Drabicki, R., and Baratz, M.E., 2008, "Functional Strength Testing of Radial and Ulnar Deviation Before and After CMC Arthroplasty," International Society of Electromyography and Kinesiology.

Miller, M.C., Thomines, F., Kuxhaus, L., Flamm, A., Schiomoler, P.J., Vipperman, J.S., and DeMeo, P.J., 2008, "Tensile Strain Measurement of the Bands of the Medial Ulnar collateral Ligament," 54th Annual Meeting of the Orthopaedic Research Society.

Miller, M.C., Vipperman, J.S., Schimoler, P.J., Kuxhaus, L., Flamm, A., and Budny, D., 2008, "Accuracy and Precision of a Control System for an Elbow Joint Simulator," Proceedings of the 2008 ASME Bioengineering Conference.

Brogdon, M.L., Kuxhaus, L., DeMeo, P.J., Schimoler, P.J., Flamm, A., Vipperman, J., and Miller, M.C., 2008, "Physiologic Length of the UCL: At What Flexion Angle Do the Bands of the Anterior Bundle Have Zero Strain?," 16th International Conference on Mechanics in Medicine and Biology.

Conti, S.F., Dazen, D., Stewart, G., Green, A., Martin, R., Kuxhaus, L., and Miller, M.C., 2008, "Proprioception after total ankle arthroplasty," Foot and Ankle International, vol.29, no.11, pp. 1069-1073.

Kuxhaus, L., DeMeo, P.J., Thomines, F., Flamm, A., Schimoler, P.J., Brogdon, M.L., Vipperman, J.S., and Miller, M.C., 2008, "Measurement of elbow medial ulnar collateral ligament strain: choice of reference length reduces interspecimen variability," American Society for Biomechanics.

Shors, H.C., Gannon, C., Miller, M.C., Schmidt, C.C., and Baratz, M.E., 2008, "Plain Radiographs Are Inadequate to Identify Overlengthening With a Radial Head Prosthesis," Journal of Hand Surgery, vol.33, no.A, pp. 335-339.

Miller, M.C., Dazen, D., Martin, R., Stewart, G.W., and Conti, S.F., 2007, "Total Ankle Arthroplasty Does Not Affect Ankle Position Sense: Testing with Robotic Actuation," 53rd Annual Meeting of the Orthopaedic Research Society.

Galik, K., Baratz, M.E., Butler, A.L., Dougherty, J., Cohen, M.S., and Miller, M.C., 2007, "The effect of annular ligament transection on radial head travel," Journal of Hand Surgery, vol.32, no.A, 8, pp. 1218-1224.

Kuxhaus, L., Schimoler, P.J., Flamm, A.M., Vipperman, J.S., Baratz, M.E., and Miller, M.C., 2007, "Moment Arm Measurement to Validate a Closed-Loop Feedback-Controlled Elbow Joint Simulator," 31st Annual Meeting of the American Society of Biomechanics.

Kuxhaus, L., Schimoler, P.J., Vipperman, J.S., Baratz, M.E., and Miller, M.C., 2007, "Changes In Camera Visibility Affect Measured Marker Motion," Proceedings of the Summer Bioengineering Conference.

Kuxhaus, L., Schimoler, P.J., Vipperman, J.S., Flamm, A., Budny, D.D., Baratz, M.E., DeMeo, P., and Miller, M.C., 2007, "Measuring Moment Arms Using Closed-Loop Force Control with an Elbow Simulator," Proceedings of the Summer Bioengineering Conference.

Schimoler, P.J., Vipperman, J.S., Flamm, A.M., Budny, D.D., Baratz, M.E., and Miller, M.C., 2007, "Switching control to Actuate Elbow Motion," 31st Annual Meeting of the American Society of Biomechanics.

Schimoler, P.J., Vipperman, J.S., Kuxhaus, L., Flamm, A., Budny, D.D., Baratz, M.E., and Miller, M.C., 2007, "Control System for an Elbow Joint Motion Simulator," ASME International Mechanical Engineering Conference and Exhibition.

Stewart, G.W., Conti, S.F., Miller, M.C., and Dazen, D., 2007, "Proprioception in the Total Ankle: A Direct Comparison of the Operative Versus the Nonoperative Ankle," American Academy of Orthopaedic Surgeons Annual Meeting.

Miller, M.C., Dreau, K., Dazen, D., Martin, R., Kali Arnold, K., and Conti, S.F., 2006, "Measurement of ankle proprioception under self-driven servocontrol," World Congress of Biomechanics, Munich, Germany.

Miller, M.C., Galik, K., Kuxhaus, L., Butler, A., Cohen, M.S., and Baratz, M.E., 2006, "Transection of the Annular Ligament Affects Radial Head Travel, but not the Axis Location in Supination-Pronation," Transactions of the Orthopaedic Research Society.

Miller, M.C., Galik, K., Kuxhaus, L., Butler, A., Cohen, M.S., and Baratz, M.E., 2006, "Translation and Travel of Monoblock and Bipolar Radial Head Replacements during Supination-Pronation," Transactions of the Orthopaedic Research Society.

Darlis, N.A., Miller, M.C., Dazen, D., Konstantin, J.K., Weiser, R.W., and Sotereanos, D.G., 2006, "The Effects of Radiofrequency Probe Application on Irrigation Fluid Temperature in the Wrist Joint," Transactions of the Orthopaedic Research Society.

Kuxhaus, L., Martin, C., Galik, K., Adrian, L., Butler, A.L., Flamm, A., Baratz, M.E., and Miller, M.C., 2006, "A computer model to evaluate radial head translation," World Congress of Biomechanics, Munich, Germany.

Sotereanos, N.G., Miller, M.C., Smith, B., Hube, R., Sewecke, J.J., and Wohlrab, D., 2006, "Utilizing Intra-Operative Pelvic Landmarks for Acetabular Component Placement in Total Hip Arthroplasty," Journal of Arthoplasty, vol.21, no.6, pp. 832-840.

Miller, M.C., Galik, K., Conti, S.F., and Smolinski, P.J., 2005, "The Effect of Polyethylene Liner Thickness on Stresses in Total Ankle Arthroplasty," Proceedings of the Orthopaedic Research Society.

Miller, M.C., Galik, K., Dazen, D., DeMeo, P., and Baratz, M.E., 2005, "The Effect of Annular Ligament resection of Radial head Kinematics," Proceedings of th ASME Bioengineering Conference.

Miller, M.C., Nair, M., and Baratz, M.E., 2005, "A Device for Assessment of Hand and Wrist Coronal Plane Strength," Journal of Biomechanical Engineering, pp. 998-1000.

Miller, M.C., Nair, M., and Baratz, M.E., 2005, "Device Design for Hand Strength Testing," Proceedings of the Design of Medical Devices Conference.

Butler, A.L., Miller, M.C., Galik, K., and Baratz, M.E., 2005, "Translational Kinematics of the Radial Head before and After Radial Head Replacement," Annual Meeting of the American Society for Surgery of the Hand, San Antonio.

Kuxhaus, L., Vipperman, J.S., Barratz, M.E., Magnusen, J.P., and Miller, M.C., 2005, "Reproducing Physiologic Moment Arms With An Elbow Simulator," XXth Congress of the International Society of Biomechanics and 29th Annual Meeting of the American Society of Biomechanics.

Miller, M.C., Galik, K., Conti, S., and Smolinski, P.J., 2004, "Stresses in the Polyethylene Liner of a Semi-Constrained Ankle Replacement," Journal of Biomechanical Engineering, pp. 636-640.

Miller, M.C., He, J., Smolinski, P.J., Donahue, K., and Conti, S.F., 2004, "Total Ankle Arthroplasty Improves Functional Measure of Gait," 71st Annual Meeting of the American Academy of Orthopaedic Surgeons, Am. Ortho. Foot & Ankle Society Specialty Day.

Galik, K., Miller, M.C., He, J., Towsen, A., and Watson, A.D., 2004, "Talonavicular Kinematics at midstance Resulting from Physiologic Muscle Loading," Proceedings of the Orthopaedic Research Society, p. 1276.

Miller, M.C., and Conti, S.F., 2003, "Measures of Gait Before and After Ankle Arthroplasty," Gait and Clinical Movement Analysis Society Annual Meeting.

Miller, M.C., Galik, K., Conti, S., and Smolinski, P., 2003, "Polyethylene Liner Stress in a Semi-constrained Ankle Prosthesis," Transactions of the 49th Annual Meeting of the Orthopaedic Research Society, p. 1299.

Chaing, P.P., Miller, M.C., and DeMeo, P.J., 2003, "Gait Analysis Following Medial Opening Wedge High Tibial Osteotomy," 70th Annual Mtg. of the American Academy of Orthopaedic Surgeons.

Smolinski, P.J., Miller, M.C., Galik, K., and Conti, S.F., 2003, "Stress Analysis of the Polyethylene Component in Total Ankle Arthroplasty: Effect of Thickness," American Society of Mechanical Engineers, IMECE.

Miller, M.C., and Conti, S.F., 2002, "Use of Gait Analysis in Total Ankle Arthroplasty," International Congress on Total ankle Arthroplasty, San Francisco, CA.

Miller, M.C., He, J., Anderson, D.D., and Sotereanos, N.G., 2002, "Use of Local bodily Landmarks in Acetabular Cup Positioning," IVth World Congress of Biomechanics, Calgary.

Miller, M.C., Smolinski, P.J., and Conti, S.F., 2002, "Gait Before and After Total Ankle Arthroplasty with a Comparison to Arthrodesis," Proceedings International Congress on Total Ankle Arthroplasty, San Francisco, CA.

Miller, M.C., Smolinski, P.J., and Conti, S.F., 2002, "Pre- and Post-operative Gait Analysis of TAA Patients," 3rd Triennial Scientific Meeting of the International Federation of Foot and Ankle Surgeons.

Galik, K., Miller, M.C., and Smolinski, P.J., 2002, "The Effect of Polyethylene Thickness on Stresses of an Ankle Joint Implant," IVth World Congress of Biomechanics, Calgary.

He, J., Miller, M.C., Riano, F., and Baratz, M.E., 2002, "Torsional Stability of Total Elbow Arthroplasty," IVth World Congress of Biomechanics, Calgary.

Mamo, D.C., Pollock, B.G., Mulsant, B., Houck, P.R., Bensasi, S., Miller, M.C., Redfern, M.S., and Reynolds, C.F., 2002, "The Effects of Nortriptyline and Paroxetine on Postural sway in Depressed Elderly Patients," American Journal of Geriatric Psychiatry, vol.10, no.2, pp. 199-205.

Riano, F., Baratz, M.E., He, J., and Miller, M.C., 2002, "Torsional Stability of humeral components in total elbow arthroplasty: Does the sparing of th condyles make difference?," Annual Meeting of the Am. Assoc. for Hand Surgery.

Smolinski, P., Galik, K., Conti, S.F., and Miller, M.C., 2002, "Stresses in Agility Total Ankle System," Proceedings International Congress on Total Ankle Arthroplasty, San Francisco, CA.

Smolinski, P.J., Galik, K., Conti, S.F., and Miller, M.C., 2002, "Computer Analysis in Total Ankle surgery," Proceedings International Congress on Total Ankle Arthroplasty, San Francisco, CA.

Miller, M.C., Berger, R.A., Petrella, A.J., and Rubash, H.E., 2001, "A Justification for the Use of the Epicondylar Axis for Femoral component Rotation in TKA," Clinical Orthopaedics and Related Research, vol.392, pp. 38-45.

Miller, M.C., Zhang, X., Berger, R., Petrella, A.J., Karmas, A., and Rubash, H., 2001, "The effect of component rotation and component placement on knee knee kinetics after arthroplasty with a semi-constrained prosthesis," Journal of Orthopaedic Research, vol.19, no.4, pp. 614-620.

Smolinski, P., Hake, R., Onipede, D., and Miller, M.C., 2001, "A computational and experimental dynamics project for an integrated engineering curriculum," Computer Applications in Engineering Education, vol.9, no.1, pp. 1-7.

Mamo, D.C., Sweet, R.A., Mulsant, B.H., Pollock, B.G., Miller, M.C., Stack, J.A., Begley, A.E., and Reynolds, C.F., 2000, "Effect of nortriptyline and paroxetine on extrapyramidal signs and symptoms: A prospective double-blind study in depressed elderly patients," American Journal for Geriatric Psychiatry, Summer, vol.8, no.3, pp. 226-231.

Priano, S.V., Miller, M.C., Watson, A.D., DeMeo, P.J., Hughes, T.B., and Cox, G., 2000, "A Screening Method for the Diagnosis of Rotator Cuff Pathology: the Subacromial Space/Humeral Head Radius Ratio," Am. Orthopaedic Society for Sports Medicine 26th Annual Meeting.

Spotts, V.J., and Miller, M.C., 2000, "Time and frequency analysis of emg signals with steady-state-dynamic and transient loading of the biceps," International Journal of Electromyography and Kinesiology, vol.10, pp. 15-23.

Miller, M.C., Aitken, S.G., Petrella, A.J., and Conti, S.F., 1999, "Experimental Measurement of Weightbearing after Ankle Replacement," Advances in Bioengineering, pp. 303-304.

Miller, M.C., Petrella, A.J., Berger, R., Karmas, A., and Rubash, H., 1999, "Cruciate Retention in Total Knee Arthroplasty: the Effect of Femoral Component Rotation," Transactions of the 44th Orthopaedic Research Society Meeting, p. 578.

Petrella, A.J., Miller, M.C., Berger, R., Karmas, A., and Rubash, H., 1999, "Patellar Button Medialization Reduces Medial-Lateral Forces," Transactions of the 44th Orthopaedic Research Society Meeting, p. 577.

Petrella, A.J., Berger, R., Karmas, A., Rubash, H., and Miller, M.C., 1999, "Loss of PCL Integrity and Anterior-Posterior tibiofemoral Translation after Total Knee Arthroplasty," Transactions of the 44th Orthopaedic Research Society Meeting, p. 376.

Petrella, A.J., Karmas, A., Berger, R.A., Rubash, H.E., and Miller, M.C., 1999, "Medial placement of the patellar button improves contact pressure distribution following total knee arthroplasty," Advances in Bioengineering, pp. 207-208.

Suggs, J.F., Petrella, A.J., Smolinski, P.J., and Miller, M.C., 1999, "Design of a tibio-talar joint replacement wear test machine," Advances in Bioengineering, pp. 5-6.

Miller, M.C., Berger, R.A., Petrella, A.J., and Rubash, H.E., 1998, "Experimental evidence demonstrates the existence of a window of stability with respect to TKA component placement," transactions of the 43rd Orthopaedic Research Society Meeting, p. 705.

Szigethy, X., Smolinski, P., Galik, K., Conti, S., and Miller, M.C., 1998, "A comparative stress analysis of tibial implantation and tibiofibular implantation in total ankle arthroplasty," transactions of the 43rd Orthopaedic Research Society Meeting, p. 1123.

Miller, M.C., Zhang, A.X., Berger, R., Kovach, C., Doehring, T., and Rubash, H.E., 1997, "The in-vitro effect of lateral retinacular release," Transactions of the 42nd Orthopaedic Research Society Meeting, p. 732.

Ebig, M., Buredett, R., Pincivero, D., Lephart, S., and Miller, M.C., 1997, "The effect of sudden inversion stress on emg activity of the peroneal and tibialis anterior muscles in the chronically unstable ankle," Journal of the Orthopaedic and Sports Physical Therapy, pp. 73-77.

Smolinski, P.J., Kedzierski, D., Miller, M.C., rubash, H.E., and Shanbag, A., 1997, "Device design for the measurement of acetabular cup fixity," Advances in Bioengineering, pp. 299-300.

Miller, M.C., Zhang, X., Berger, R., Petrella, A., and Rubash, H., 1996, "Experimental measurement of patellar kinetics after total knee arthroplasty," Advances in Bioengineering, pp. 154-155.

Shelley, F., Anderson, D., Kolar, M., Miller, M.C., and Rubash, H., 1996, "Modeling Hip Joint Forces in Stair Climbing," IMechE, vol.210, pp. 65-68.

Laghrissi-Thode, F., Pollock, B.G., Miller, M.C., and Mulsant, B., 1995, "Double-blind comparison of paroxetine and nortipyline on the postural stability of late-life depressed patients," Psychopharmacology Bulletin, vol.34, no.4, pp. 659-663.

Laghrissi-Thode, F., Pollock, B.G., Miller, M.C., Rachid, K., and Altieri, L., 1995, "Comparative assessment of sertraline and nortriptylene on body sway in older depressed patients," American Journal of Geriatric Psychiatry, vol.3, no.3, pp. 217-228.

Miller, M.C., 1994, "Confusion of Innovation and Creativity in Design," American Society for Engineering Education N.C. Section Proceedings.

Miller, M.C., Zhang, X., Berger, R., Crossett, L., and Rubash, H., 1994, "In vitro measurement of patellofemoral kinetics with variation in patellar thickness," Proc. Orthopedic Research Society.

Miller, M.C., Zhang, X., Berger, R., Crossett, L., and Rubash, H., 1994, "The effect of patellar thickness of patellofemoral loads - initial results," Proc. of the Southern Biomedical Conference.

Miller, M.C., Zhang, X., Berger, R., Crossett, L., and Rubash, H., 1994, "The effect of patellar thickness of patellofemoral loads before and after total knee arthroplasty," Proceedings of the World Congress of Biomechanics, Amsterdam.

Zhang, X., Miller, M.C., Berger, R., Crossett, L., and Rubash, H., 1994, "Tibial translation after total knee arthroplasty," Proceedings of American Society of Biomechanics, pp. 111-112.

Miller, M.C., 1993, "Are Mechanical Design Projects Without Physical Completion Meaningful?," American Society for Engineering Education N.C. Section Proceedings.

Miller, M.C., and Deddo, D.A., 1993, "Glenohumeral Reaction Force and Muscle Loads in Scapular Plane Abduction with Rotator Cuff Activity and Supraspinatus Deficiency," Conference Proceedings of the American Society of Biomechanics, pp. 35-36.

Miller, M.C., Andreyko, G.M., Patwardhan, A., and Meade, K., 1993, "Design and testing of a device to measure vertebral endplate detection," Proceedings of ASME-AIChE-ASCE Bioengineering Conference, pp. 65-66.

Shelley, F., Anderson, D., Kolar, M., Miller, M.C., and Rubash, H., 1992, "A Device to model the hip during stair climbing, including consideration of the extensor, abductor and adductor muscle groups," Advances in Bioengineering, pp. 121-124.

Miller, M.C., Smolinski, P.J., Bains, K.P., Klein, A., and Fu, F., 1991, "A model of the deformation of the inferior glenohumeral ligaments in the cocking phase of throwing," Proceedings of the Orthopaedic Research Society.

Miller, M.C., Schultz, A.B., and Alexander, N., 1989, "Dynamics of Rising from a Chair: Experimental Data Collection," ASCE/ASME Joint Biomechanics Symposium, pp. 329-333.

Miller, M.C., Schultz, A.B., Warwick, D., and Alexander, N., 1989, "Dynamics of a Sagittally Symmetric Chair Rise," Proceedings of the American Society of Biomechanics, pp. 154-157.

Zindrick, M.R., Knight, G.W., Bunch, W.H., Miller, M.C., Butler, D.M., Lorenz, M., and Behal, R., 1989, "Factors Influencing the Penetration of Wires into the Neural Canal During Segmental Wiring," Journal of Bone and Joint Surgery, pp. 742-750.

Schmidt, C.C., DeGravelle, M., Sawardeker, P., Brown, B., and Miller, M.C., "Factors Affecting Supination Strength Following A Distal Biceps Rupture," Closed Meeting of the American Shoulder and Elbow Surgeons (ASES) 2012.

Vipperman, J.S., Schimoler, P., Kuxhaus, L., and Miller, M.C., 2009, "Robotic Controller Design for an Elbow Simulator," BMES 2009.

Vipperman, J.S., Miller, M.C., Thomines, F., Kuxhaus, L., Flamm, A.M., Schimoler, P.J., and DeMeo, P.J., 2008, "Tensile strain measurement of the bands of the medial ulnar collateral ligament," 2008 ORS annual meeting, San Francisco, CA.

Vipperman, J.S., Schimoler, P.J., Kuxhaus, L., Budny, D.D., Flamm, A.M., and Miller, M.C., 2008, "Accuracy and precision of a control system for an elbow joint simulator," Accepted to the 2008 ASME Summer Bioengineering Conference, Marco Island, FL.

Vipperman, J.S., Kuxhaus, L., Schimoler, P., Flamm, A.M., Baratz, M.E., and Miller, M.C., 2007, "Moment arm measurement to validate a closed-loop feedback-controlled elbow joint simulator," ASB 2007 Conference, Stanford, CA.

Vipperman, J.S., Kuxhaus, L., Schimoler, P.J., and Miller, M.C., 2007, "Closed-loop Control Measurement of Moment Arms During Pronation-Supination in an Elbow Simulator," Northeast American Society of Biomechanics Conference, College Park, Md.

Vipperman, J.S., Kuxhaus, L., Schimoler, P.J., Baratz, M.E., and Miller, M.C., 2007, "Changes in camera visibility affect measured marker motion," ASME Summer Bioengineering Conference, Keystone Resort & Conference Center, Keystone, Colorado, USA.

Vipperman, J.S., Kuxhaus, L., Schimoler, P.J., Flamm, A.M., Budny, D., Baratz, M.E., DeMeo, P.J., and Miller, M.C., 2007, "Measuring Moment Arms Using Closed-loop Force Control With an Elbow Simulator," Paper SBC2007-176513, Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC2007), Keystone Resort & Conference Center, Keystone, Colorado, USA.

Vipperman, J.S., Schimoler, P., Kuxhaus, L., Budny, D.D., Flamm, A.M., Baratz, M.E., and Miller, M.C., 2007, "Switching control to actuate elbow motion," ASB 2007 Conference, Stanford, CA.

Vipperman, J.S., Kuxhaus, L., Baratz, M.E., Magnussen, J.P., and Miller, M.C., 2005, "Reproducing Physiologic Moment Arms With an Elbow Simulator," 20th meeting of the American Society of Biomechanics, Cleveland, OH.

Smolinski, P., Galik, K., Conti, S., and Miller, M., 2003, "Effect of Polyethylene Component Thickness on Stresses in Total Ankle Arthroplasty," Proceedings of the Seventh U.S. Annual Congress on Computational Mechanics, Albuquerque, NM.

Smolinski, P., Galik, K., Conti, S., and Miller, M.C., 2002, "Computer Analysis in Total Ankle Surgery," International Congress on Total Ankle Arthroplasty, Proceedings, San Francisco, CA.

Vipperman, J.S., Brogdon, M.L., Kuxhaus, L., DeMeo, P.J., Schimoler, P.J., Flamm, A.M., and Miller, M.C., 2008, "Physiologic length of the UCL: at what flexion angle do the bands of the anterior bundle have zero strain?," ICMMB Conference, Pittsburgh, PA.

Vipperman, J.S., Kuxhaus, L., Thomines, F., Flamm, A.M., Schimoler, P.J., Brogdon, M.L., DeMeo, P.J., and Miller, M.C., 2008, "Measurement of elbow medial ulnar collateral ligament strain: choice of reference length reduces interspecimen variability," ASB Conference, Ann Arbor, MI.

Miller, M.C., Baratz, M.E., He, J., and Devanny, P., 2006, "A METHOD AND APPARATUS FOR ASSESSING HAND STRENGTH," 7,152,471.

Miller, M.C., "Patent Pending: A Universal Hand Strength Test Apparatus: Grip, Pinch and Twist."